甲基丙烯酸甲酯与氯丁胶乳的乳液接枝聚合
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

湖北省自然科学基金资助项目(2010CDZ065);黄冈师范学院博士基金项目(09CD156)


Emulsion Grafting Polymerization of Chloroprene Latex with Methyl Methacrylate
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    采用乳液聚合法,成功地将甲基丙烯酸甲酯(MMA)接枝到氯丁胶乳(CRL)上,红外光谱和核磁共振氢谱证实接枝产物的生成。引发体系研究结果表明,引发剂叔丁基过氧化氢-四乙烯五胺(t-BHP/TEPA)引发效率最高,当其质量占氯丁胶乳干质量的0.5% 时,单体转化率和接枝效率分别可达99.1%、54.9%。根据分子轨道理论,采用密度泛函理论(DFT)的B3LYP方法,对CRL接枝反应的活性点和引发剂自由基夺氢活性进行了分析。发现,CRL与双键相连的α-C(非连接Cl原子位)的C-H位的反应活性相对最大,引发剂叔丁基过氧化氢(t-BHP)夺氢活性较大。此结论与实验结果相吻合。

    Abstract:

    Methyl methacrylate (MMA) was grafted onto chloroprene latex(CRL) by emulsion polymerization. The structure of the grafted polymer was confirmed by FT-IR and 1H-NMR. The effect of the initiator concentration on the emulsion grafting efficiency was analyzed. The results show that the monomer conversion and the grafting efficiency reach 99.1% and 54.9%, respectively when the mass of initiator tert-butyl hydroperoxide/tetraethylenepentamine (t-BHP/TEPA) is m(initiator)/m(CRL)=0.5/100. The graft sites and the capture hydrogen activity of initiator radical were analyzed by B3LYP method of density functional theory (DFT) basec on molecular orbital theory. It is found that the reaction activity of C-H point of α-C connected with double bond of CRL (not the point of connecting Cl atom) is higher, and the activity to capture hydrogen of initiator t-BHP is higher. Theoretical analysis coincided with experiment results.

    参考文献
    相似文献
    引证文献
引用本文

张 凯,黄春保,沈慧芳,陈焕钦.甲基丙烯酸甲酯与氯丁胶乳的乳液接枝聚合[J].高分子材料科学与工程,2014,30(1):141-144. Kai Zhang, Chunbao Huang, Huifang Shen, Huanqin Chen. Emulsion Grafting Polymerization of Chloroprene Latex with Methyl Methacrylate[J]. Polymer Materials Science & Engineering,2014,30(1):141-144.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2014-01-07
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司