聚氯乙烯接枝烯丙基聚乙二醇的制备及成膜性能
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

宁波市自然科学基金资助项目(2012A610170);浙江省自然科学基金资助项目(LY12B06001)


Membrane Property of PVC-g-APEG Grafting Modified Material
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    以氯化亚铜(CuCl)/2,2’-联吡啶(BPy)为催化配位体系,N,N-二甲基乙酰胺(DMAc)作为溶剂,通过原子转移自由基聚合(ATRP)法在聚氯乙烯(PVC)分子链上接枝烯丙基聚乙二醇(APEG)。X 射线光电子能谱(XPS)、红外光谱(FT-IR)和核磁共振(1H-NMR)表明:APEG单体成功地接枝到了PVC链上;改性材料经相分离法制备过滤膜,膜的孔径分布范围为0.117μm~0.247μm,接触角在300s内由81°下降至64.4°;0.05MPa跨膜压差下,初始纯水通量为1677L/(m2·h);牛血清蛋白(BSA)液过滤试验共循环3次,0.05MPa跨膜压差下,首次循环初始通量为737L/(m2·h),经3次循环后BSA通量稳定在101L/(m2·h),显示出较好的抗污染性能。

    Abstract:

    Allyl polyethylene glycols (APEG) was grafted onto poly (vinyl chloride) (PVC) via atom transfer radical polymerization (ATRP) method. PVC was solved in N,N-dimethylacetamide (DMAc) and cuprous chloride (CuCl)/2,2’-dipyridine (BPy) acted as the catalyst system in the reaction. The properties of the modified polymer were characterized by X-ray photoelectron spectroscopy (XPS), Fourier transform infrared spectrometry (FT-IR) and 1H-NMR spectroscopy. These results indicate that APEG was successfully grafted onto PVC. This modified polymer was used to form a filtration membrane by phase-separation method. The pore size range is 0.117 μm~0.247 μm. Water contact angle of the membrane surface decreases from 81° to 64.4° in 300s. The initial pure water flux under 0.05 MPa transmembrane pressure is 1677 L/(m2·h). The initial BSA solution flux under 0.05 MPa transmembrane pressure is 737 L/(m2·h),it declines to steady 101 L/(m2·h) at the end of the three cycles.

    参考文献
    相似文献
    引证文献
引用本文

马均治,韩 玉,陆 茵.聚氯乙烯接枝烯丙基聚乙二醇的制备及成膜性能[J].高分子材料科学与工程,2014,30(1):145-148. Junzhi Ma, Yu Han, Yin Lu. Membrane Property of PVC-g-APEG Grafting Modified Material[J]. Polymer Materials Science & Engineering,2014,30(1):145-148.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2014-01-07
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司