尼龙/聚氨酯共混材料的研究进展
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家“863”项目(2011AA02A204-03);河南省创新人才计划(124200510011)资助项目


Progress on the Preparation of Polyamide/Thermoplastic Polyurethane Elastomer Blends
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    尼龙的弯曲强度、耐磨、耐蠕变等性能非常突出,但在低温及干态下冲击强度较低,吸水率高。针对这些不足的增韧改性研究很多。在尼龙基体中加入一定量的橡胶或弹性体,能使其冲击强度显著提高。增韧改性可以使尼龙树脂的抗冲击性能和耐低温性能明显改善,并拓宽其应用领域。文中对近年来尼龙与弹性体复合改性的方法进行了概括,特别阐述了尼龙与聚氨酯的共混改性进展,并提出了使用氨纶废丝增韧尼龙的新方法。

    Abstract:

    Due to the outstanding performance in bend, anti-abrasion and anti-creep, nylon, one of the most important engineering plastic, has a broad use in industry. But high water adsorption and low impact strength in dry state and low temperature are two important factors to restrict application of nylon. Blending nylon with appropriate flexibilizers is an effective and efficient way to make up these two defects, and much research work has been done in this area. Adding a certain amount of rubber and elastomer into nylon will significantly improve its impact strength, which will definitely expand application fields of nylon. In this paper, the methods for the toughness modification of nylon, especially the progress of blending with thermoplastic polyurethane elastomer (TPU), were reviewed. Furthermore, a new way for toughening of nylon, modified with abandoned spandex, was proposed.

    参考文献
    相似文献
    引证文献
引用本文

付 鹏,崔 吉吉,张佳阳,刘民英,张韶红,赵清香.尼龙/聚氨酯共混材料的研究进展[J].高分子材料科学与工程,2014,30(1):181-185. Peng Fu, Zhe Cui, Jiayang Zhang, Minying Liu, Shaohong Zhang, Qingxiang Zhao. Progress on the Preparation of Polyamide/Thermoplastic Polyurethane Elastomer Blends[J]. Polymer Materials Science & Engineering,2014,30(1):181-185.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2014-01-07
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司