碳纤维表面改性及对其复合材料性能的影响
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金资助项目(51073098)


Surface Modification of Carbon Fiber and Its Impact on the Performance of Composite Materials
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    采用γ射线辐照法、电化学聚合法改性碳纤维表面,研究了以三缩四乙二醇为接枝单体,在不同的辐照剂量下辐照处理碳纤维,以及电化学聚合衣康酸改性碳纤维。利用扫描电子显微镜、X光电子能谱仪、电子万能试验机研究了处理前后的碳纤维的表面形貌、复合材料的断面形貌、表面化学组成及复合材料层间剪切强度(ILSS)的变化。研究结果表明,2种处理方法都能有效提高碳纤维表面活性,与环氧树脂的浸润性提高,复合材料断面纤维拔出明显减少。在200kGy的辐照剂量下处理得到的碳纤维与环氧树脂复合材料的ILSS的提高幅度最大,达到31.2%。同时经电聚合处理后的碳纤维与环氧树脂复合材料的ILSS的提高幅度要大于经γ射线辐照处理后的试样,达到40%。

    Abstract:

    By γ-ray irradiation and electrochemical polymerization, the surface of carbon fiber were modified. Tetraethylene glycol was used as graft monomer. Scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS) and electronic universal testing machine were used to study the changes in the surface morphology, the fracture surface of carbon fiber composites, the surface chemical composition and interlaminar shear strength(ILSS) of the composite materials before and after the modification. The results show that both treatments can effectively increase the surface activity of carbon fiber, and improve wettability and significantly reduce the cross-section fiber pullout of epoxy resin/carbon fiber composites. Also, ILSS is improved significantly. Especially at the radiation dose of 200 kGy, ILSS of epoxy resin /carbon fiber composites improves the most, 31.2%. Meanwhile, after the treatment of electro-polymerization, ILSS improvement for epoxy resin/carbon fiber composites(~40%) is greater than that for the sample treated by γ-ray irradiation.

    参考文献
    相似文献
    引证文献
引用本文

王源升,朱珊珊,姚树人,周慧慧,石继梅.碳纤维表面改性及对其复合材料性能的影响[J].高分子材料科学与工程,2014,30(2):16-20. Yuansheng Wang, Shanshan Zhu, Shuren Yao, Huihui Zhou, Jimei Shi. Surface Modification of Carbon Fiber and Its Impact on the Performance of Composite Materials[J]. Polymer Materials Science & Engineering,2014,30(2):16-20.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2014-02-11
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司