LLDPE/MAH-LLDPE/SiO2 复合材料的形态结构与增韧机理
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

湖北省教育厅科学技术重点资助项目(D20121709)


Morphology and Toughening Mechanism of LLDPE/MAH-LLDPE/SiO2 Composites
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    采用线型低密度聚乙烯(LLDPE)、纳米二氧化硅(SiO2)与马来酸酐接枝的LLDPE (MAH-LLDPE)通过熔融共混与注塑成型工艺,制备了LLDPE/MAH-LLDPE/SiO2 复合材料。MAH-LLDPE对LLDPE/SiO2 复合材料起到了界面增容作用,纳米SiO2 粒子以30nm~160nm 的尺寸较均匀地分散在复合材料中,并与聚合物基体形成良好的界面粘接。这些均匀分散的SiO2 粒子起到异相成核作用,促进了复合材料中LLDPE相的结晶,提高了其晶面厚度、熔点和结晶温度;另一方面,SiO2 和MAH-LLDPE中少量的凝胶降低了LLDPE的结晶度。在复合材料冲击断裂过程中,纳米SiO2粒子起到应力集中作用,诱导其邻近的聚合物基体屈服、界面空化;同时呈多尺度分布的纳米SiO2 聚集粒子发生粒子间的分离,吸收能量,从而实现了对LLDPE的增韧作用。

    Abstract:

    Using maleic anhydride grafted linear low density polyethylene (MAH-LLDPE) as compatibilizer, composites based on linear low density polyethylene (LLDPE) and nano-silica (SiO2) were prepared via melt mixing and injection molding. The addition of MAH-LLDPE enhances the interfacial interaction between SiO2 and LLDPE, which improves the dispersion ofSiO2 in composites. The heterogeneous nucleation of SiO2 increases the apparent crystal size, melting point (Tm) and crystallization temperature (Tc) of LLDPE in composites. The crystallinity degree of LLDPE decreases obviously owing to the prohibition of SiO2 and the gels in MAH-LLDPE on the diffusion of polymer melts. During impact fracture, the stress concentration effects of SiO2 nanoparticle induce its adjacent matrix yielding and interface cavitation. And multi-scale SiO2 aggregated particles are separated so that they absorb energy. These factors result in toughening the LLDPE/SiO2 composites.

    参考文献
    相似文献
    引证文献
引用本文

黄乐平,任 亮,周兴平,解孝林. LLDPE/MAH-LLDPE/SiO2 复合材料的形态结构与增韧机理[J].高分子材料科学与工程,2014,30(2):42-45. Leping Huang, Liang Ren, Xinping Zhou, Xiaoling Xie. Morphology and Toughening Mechanism of LLDPE/MAH-LLDPE/SiO2 Composites[J]. Polymer Materials Science & Engineering,2014,30(2):42-45.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2014-02-11
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司