聚消旋丙交酯-b-聚氧乙烯星形嵌段聚合物的受限结晶行为
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

高等学校博士学科点专项科研基金资助项目(200800030047);国家自然科学基金资助项目(20874056)


Confined Crystallization of Six-Armed Star-Shaped Poly(D,L-Lactide)-b-Poly(EthyleneOxide) Copolymer
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    通过阳离子活性开环聚合和大分子酯化反应的两步法,合成两亲性的聚消旋丙交酯-b-聚氧乙烯(sPDLLA-b-PEO)六臂星形嵌段聚合物。通过差示扫描量热法研究了聚合物本体结晶行为。结果表明,无定形链段PDLLA 的引入和特定的星形结构,使得PEO 链段的结晶受到限制,出现了冷结晶现象,并且最高结晶温度随着升温速率的增大而升高。通过偏光显微镜研究了六臂嵌段聚合物的结晶形貌,发现六臂sPDLLA-b-PEO 生长产生环带球晶。并且通过调控聚合物与溶剂的比例和聚合物膜的厚度,发现溶剂可以减小球晶生长中积累的应力,使环带结构消失;但六臂聚合物对于几何受限的响应性较强,当膜厚减小时,环带结构重新出现。

    Abstract:

    Amphiphilic six-armed star-shaped poly(D, L-lactide)-b-poly(ethylene oxide) (SPDLLA-b-PEO) was synthesized by combination of ring opening polymerization and macromolecular esterification to investigate its confined crystallization and micellization behavior due to its novel structure. The composition and structure of star-shaped copolymer were characterized by 1H-NMR, GPC and FT-IR. The bulk crystallization behaviors of sPDLLA-b-PEO were determined by DSC. sPDLLA-b-PEO exhibits specific cold crystallization process due to chain end restriction from both the star-shaped molecular architecture and amorphous PDLLA block. Moreover, the maximum cold crystallization temperature increases with heating rates increasing. It is also found by POM that sPDLLA-b-PEO has banded spherulites. The band periodicity in the spherulites of the block copolymers in solution cast films changes with evaporation rate, and becomes larger or even disappears.

    参考文献
    相似文献
    引证文献
引用本文

张凤波,谢续明.聚消旋丙交酯-b-聚氧乙烯星形嵌段聚合物的受限结晶行为[J].高分子材料科学与工程,2014,30(2):46-50. Fengbo Zhang, Xuming Xie. Confined Crystallization of Six-Armed Star-Shaped Poly(D, L-Lactide)-b-Poly(EthyleneOxide) Copolymer[J]. Polymer Materials Science & Engineering,2014,30(2):46-50.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2014-02-11
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司