PE100管材专用料的结构与性能
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:


Relationship Between Structure and Properties of PE100 Resins
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    选取PE100管材专用料树脂TUB121和GC100S,引入凝胶渗透色谱、溶液分级和连续自成核退火(SSA)热分级联用的方法研究了PE100管材料分子链结构特点;并利用单轴拉伸测试获得的性能参数,快速有效地评价了材料抗慢速裂纹增长性能(SCG)。得出TUB121重均分子量相对较低,其加工性能和刚性优异;同时其将大量共聚单体均匀地分布在高相对分子质量部分,能有效形成tie链,保证了材料的抗SCG性能;而吉化初期的GC100S重均分子量很高,共聚单体分布不均匀,虽然其抗SCG性能优异,但是加工性能和抗快速裂纹增长性能(RCP)较差;生产线调整后,GC100S系列样品相对分子质量逐渐降低,共聚单体在高相对分子质量组分上分布更加均匀,使其在一定的抗SCG性能基础上,明显改善了加工性能和抗RCP性能。

    Abstract:

    Molecular structure of a series of PE100 resins (TUB121 and GC100S) was studied via GPC and combination of solution fractionation and successive self-nucleation and annealing (SSA) thermal fractionation. Furthermore, uniaxial tensile test was successfully applied to evaluate the slow crack growth (SCG) resistance of PE100 pipes effectively. It is found that the weight molecular weight (Mw) of TUB121 is lower than that of GC100S, which attributes to its excellent processability and stiffness. Furthermore, massive comonomers are distributed in the high Mw part to produce plenty of tie molecules which can improve the SCG resistance of pipes. On the contrary, the first batch of GC100S of which comonomers are not distributed in the molecular chains unifor mLy has excellent SCG resistance because of its extremely high Mw. Meanwhile, its processability and rapid crack growth resistance (RCP) are very poor. After the adjustment of production line, Mw of GC100S decreases and the comonomers distribute more unifor mLy in its high Mw part which obviously improves the processability and RCP resistance with outstanding SCG resistance.

    参考文献
    相似文献
    引证文献
引用本文

吴 桐,蔡燎原,蓝 芳,曹 亚,向 明. PE100管材专用料的结构与性能[J].高分子材料科学与工程,2014,30(2):77-82. Tong Wu, Liaoyuan Cai, Fang Lan, Ya Cao, Ming Xiang. Relationship Between Structure and Properties of PE100 Resins[J]. Polymer Materials Science & Engineering,2014,30(2):77-82.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2014-02-11
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司