天然纤维增强阴离子聚合尼龙6复合材料的加工与性能
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金创新群体资助项目(51121001)


Process and Properties of Natural Fiber Reinforced Anionic Polyamide-6 Composites
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    采用真空辅助树脂传递模塑(VARTM)法制备了天然纤维增强阴离子聚合尼龙6(APA-6)复合材料,并将其与玻璃纤维复合材料进行比较。首先对天然纤维进行预处理,然后对反应加工过程进行优化,选取了低活性和弱碱性的己内酰胺溴化镁(C1)作为引发剂,制备得到天然纤维复合材料。采用差示扫描量热仪分析了样品的结晶度,结果显示,天然纤维复合材料有更高的结晶度。扫描电镜观察2种复合材料的界面情况表明,天然纤维复合材料有更好的界面性能。对纯APA-6及其复合材料的弯曲性能和拉伸性能测试表明,天然纤维的加入使材料的力学性能有了较大幅度的提高,并且拥有较高的比强度和比模量。

    Abstract:

    Natural fiber reinforced APA-6 composites were prepared by vacuum assisted resin transfer molding (VARTM), and were compared with glass fiber reinforced composites. The pretreatment of natural fibers was introduced. Caprolactam magnesium bromide (C1) was used as initiator. The degree of crystallinity was measured through DSC. The result shows that natural fiber reinforced composites have higher degree of crystallinity. SEM was used for observing the interfacial properties of the composites. It shows that the natural fiber reinforced composites have better interfacial properties. At last, the flexile modulus and tensile strength were researched. The mechanical properties increase by a wide margin, and the specific modulus and specific tensile strength are in a high level.

    参考文献
    相似文献
    引证文献
引用本文

陈 鹏,阚 泽,刘正英,冯建民,杨鸣波.天然纤维增强阴离子聚合尼龙6复合材料的加工与性能[J].高分子材料科学与工程,2014,30(2):83-88. Peng Chen, Ze Kan, Zhengying Liu, Jianmin Feng, Mingbo Yang. Process and Properties of Natural Fiber Reinforced Anionic Polyamide-6 Composites[J]. Polymer Materials Science & Engineering,2014,30(2):83-88.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2014-02-11
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司