全拉伸及传统两步法聚苯硫醚纤维的结构性能比较
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:


Structure and Properties of Fully Drawn and Two-Step Spun Ploy(Phenylene Sulfide) Fibers
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    分别通过熔融纺丝方法制备了全拉伸聚苯硫醚(FD-PPS)纤维和传统两步法聚苯硫醚(TS-PPS)纤维,并采用差示扫描量热分析仪、广角X射线衍射、二维广角X射线衍射等表征手段分析了2种方法制得的PPS纤维内部结构、热性能、结晶行为、力学性能及尺寸稳定性上的差异。结果表明,在相同总拉伸倍数下,FD-PPS纤维的总取向度略低于TSPPS;FD-PPS纤维的结晶度较大,但其纤维内部的晶体平均完善程度更差。FD-PPS纤维可以达到甚至超过TS-PPS纤维的断裂强度,但FD-PPS纤维的干热收缩率和耐热水收缩率都较大,尺寸稳定性还需进一步改善。

    Abstract:

    Two kinds of Poly(phenylene sulfide) fibers were prepared by one step fully drawn spinning process (FD-PPS) and two-step spinning drawn and heating treatment process (TS-PPS), respectively. The thermal properties, crystalline properties, mechanical properties, orientation, dimensional stability of the two kinds of fibers were investigated by differential scanning calorimetry (DSC), WAXD, two-dimensional wide angle X-ray diffraction (2D-WAXD), etc. The results show that the orientation degree of FD-PPS fibers is lower than that of TS-PPS fibers at the same total drawn ratio. The crystallinity of FD-PPS fibers is higher and the perfection of crystallization is lower. The mechanical properties of FD-PPS fibers can exceed that of TS-PPS fibers, but the dry heat shrinkage and hot water shrinkage of FD-PPS fibers are larger than those of TS-PPS fibers because of shorter time of heat treatment.

    参考文献
    相似文献
    引证文献
引用本文

曾栌贤,刘鹏清,王 晓,李若松,叶光斗,徐建军.全拉伸及传统两步法聚苯硫醚纤维的结构性能比较[J].高分子材料科学与工程,2014,30(2):89-94. Luxian Zeng, Pengqing Liu, Xiao Wang, Ruosong Li, Guangdou Ye, Jianjun Xu. Structure and Properties of Fully Drawn and Two-Step Spun Ploy(Phenylene Sulfide) Fibers[J]. Polymer Materials Science & Engineering,2014,30(2):89-94.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2014-02-11
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司