Abstract:The L-Phe resin with flexible chain was synthesized by the reaction of L-phenylalanine (L-Phe) with comb-like and hydrophilic epoxy polystyrene microspheres carrier (PS-acyl-g-p(AM-GMA)) which was prepared by atom transfer radical polymerization (ATRP), using the chloroacetyl styrene divinylbenzene copolymer microspheres (PS-cyl-Cl) as the initiator, acrylamide (AM) and glycidyl methacrylate (GMA) as monomer. Several factors were discussed and optimized during the reaction, such as reaction time, swelling time of raw resin, solvent system, the amount of catalyst. The final optimum conditions obtained are as follows: with the reaction time extending to 20 h and the swelling time of raw resin to 24 h, the maximum rate of mass gain was achieved; using water as solvent, the better economic result was obtained than using DMF as solvent; with n(catalyst) increasing to 20% of n(epoxy resin), the result was the best. Under the above condition, the conversion rate and maximum loading of L-Phe can be up to 72% and 2.4 mmol/g, respectively. The optimum conditions for the adsorption of Cu2+ with the L-Phe resin with flexible chain as follows: solution concentration of Cu2+ 100 mmol/L, pH 5.8 to 8.0,the adsorption time 80 min i.e. reaches saturation. The maximum amount of adsorption of the resin is up to 2.0 mmol/g.