PCL-b-PMMA/PEO 共混薄膜的微相分离形貌
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金资助项目(20674032)


Microphase Separation Morphologies of PCL-b-PMMA/PEO Blending Films
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    通过聚氧化乙烯(PEO)与聚己内酯-聚甲基丙烯酸甲酯嵌段共聚物(PCL-b-PMMA)的共混来调节聚己内酯(PCL)与聚甲基丙烯酸甲酯(PMMA)嵌段的微相分离行为。采用原子力显微镜研究了PEO 的质量分数和相对分子质量对PCL-b-PMMA/PEO 共混薄膜微相分离形貌的影响。结果表明,共混薄膜形成了以PMMA/PEO 为连续相,PCL呈柱状微区垂直于薄膜表面的微相分离形貌,PMMA/PEO 链段无法在PCL柱状微区上方形成完全覆盖,导致薄膜表面形成许多孔洞。随着PEO 含量增加,PCL链段聚集趋势增强,柱状微区尺寸不断增大;随着PEO 相对分子质量的增加,PMMA/PEO 在PCL微区上方形成的有效覆盖减少,薄膜表面的孔洞数量和尺寸增大;当PEO 与不同嵌段比PCL-b-PMMA共混后,随嵌段共聚物中PCL链段体积分数增加,柱状微区向层状形态转变,薄膜表面孔洞消失。

    Abstract:

    Poly(ethylene oxide) (PEO) blended with diblock copolymers of ε-caprolactone and methyl methacrylate (PCL-b-PMMA) in order to modify microphase separation behavior and morphologies in PCL-b-PMMA/PEO blending film. Effects of PEO mass fraction and relative molecular mass on the microphase separation morphologies of PCL-b-PMMA/PEO thin films were investigated by AFM. The results show that microphase separation morphologies with PMMA/PEO as continuous phase and cylindrical microdomains of PCL oriented perpendicularly to the film surface were formed. The top of PCL cylindrical microdomains cannot be completely covered by PMMA/PEO segments, generating many holes on the surface of the film. With the increase of PEO content, the size of cylindrical microdomain of PCL increases due to the enhanced aggregation of PCL segments. When PEO with higher relative molecular weight was used, the efficient cover on the top of the PCL cylindrical microdomains with PMMA/PEO segments becomes less, leading to increased number and the size of holes on the surface of the film. As the volume fraction of PCL segments in PCL-b-PMMA increases, more PEO segments move towards the top of the film, giving rise to a transition of cylindrical microdomain of PCL to lamellar morphology, and finally the holes on the surface of the films disappear.

    参考文献
    相似文献
    引证文献
引用本文

朱梦冰,杨菁菁,丁永红,刘晶如,徐之光,俞 强. PCL-b-PMMA/PEO 共混薄膜的微相分离形貌[J].高分子材料科学与工程,2014,30(3):72-75. Mengbing Zhu, Jingjing Yang, Yonghong Ding, Jingru Liu, Zhiguang Xu, Qiang Yu. Microphase Separation Morphologies of PCL-b-PMMA/PEO Blending Films[J]. Polymer Materials Science & Engineering,2014,30(3):72-75.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2014-03-17
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司