聚丙烯酸酯共混改性水性硝化纤维的结构与性能
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

陕西省教育厅2012年产业化培育项目(2012JC04)


Structure and Properties of Waterborne Nitrocellulose Blended with Polyacrylate
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    以硝化纤维(NC)、异佛尔酮二异氰酸酯(IPDI)三聚体、二羟甲基丙酸(DMPa)等为主要原料,制得自乳化型水性硝化纤维乳液,并采用共混的方法制备了聚丙烯酸酯改性水性硝化纤维复合乳液(WNC/PA)。傅里叶变换红外光谱测试表明得到目标产物;研究了共混体系的乳液及膜的微观结构与性能。随着PA含量的增加,涂膜吸水率从18.9%先下降到10.5%后升高到10.9%,接触角从77.50°上升到97.11°,拉伸强度从9.3MPa升到15.7MPa后逐渐下降到7.1MPa,断裂伸长率从269.3%上升到578.3%,同时微相分离程度逐渐减小,热稳定性提高。当PA 质量分数在30%左右时,WNC/PA膜同时具备良好的耐水性、力学性能及热稳定性。

    Abstract:

    The self-emulsified waterborne nitrocellulose (WNC) was synthesized with nitrocellulose (NC) for coating, isophorone diisocyanate (IPDI) trimer and dimethylol propionic acid (DMPa). Polyacrylate (PA) modified WNC (WNC/PA) emulsion was obtained by blending WNC with PA. FT-IR characterization reveals that the target product was obtained. The micro structure and properties of WNC/PA emulsions and films were studied. With the increase of PA mass fraction, water absorption of the films decreases from 18.9% to 10.5% followed by a slight increase to 10.9%; water contact angle of the films increases from 77.50° to 97.11°; tensile strength increases from 9.3 MPa to 15.7 MPa followed by a descend to 7.1 MPa; elongation at break increases from 269.3% to 578.3%. Meanwhile, the degree of microphase separation decreases gradually; the thermostability is improved. When mass fraction of PA is equal to approximately 30%, WNC/PA coating has an excellent water resistance, mechanical property and thermostability.

    参考文献
    相似文献
    引证文献
引用本文

苏秀霞,张 丹,董 伟,毛 敏.聚丙烯酸酯共混改性水性硝化纤维的结构与性能[J].高分子材料科学与工程,2014,30(3):89-94. Xiuxia Su, Dan Zhang, Wei Dong, Min Mao. Structure and Properties of Waterborne Nitrocellulose Blended with Polyacrylate[J]. Polymer Materials Science & Engineering,2014,30(3):89-94.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2014-03-17
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司