气体压力对气辅共挤成型界面的影响
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金资助项目(51163011);赣鄱英才555工程领军人物培养计划;江西省青年科学基金(20122BAB216012)


Effect of Air Pressure on Interface Profilein Gas-Assisted Coextrusion Process
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    将气体简化为广义牛顿流体,并作为单独一层,针对矩形气辅共挤口模,建立了三维粘弹有限元模型,对理论模型进行了数值计算,研究了气体压力对气辅共挤成型界面形貌的影响及形成稳定气垫层所需最小气体压力与气垫层厚度和熔体流率的关系。研究表明,当稳定气垫层形成后,随着气压力或气垫层厚度的增大,共挤制品挤出胀大率减小,粘性包围程度增大;形成稳定气垫层所需的最小气体压力随气垫层厚度的增大而减小,随着熔体流率的增大而增大。

    Abstract:

    A three-dimensional viscoelastic numerical simulation was developed for gas-assisted coextrusion through a rectangular channel using the finite element method. The Phan-Thien and Tanner (PTT) model was considered as viscoelastic constitutive equations and the gas was simplified as a generalized Newtonian fluid. The effect of gas pressure on interface profile in gas assisted coextrusion processes was examined. The relationships of the minimum gas pressure to establish a stable gas layer at a die/molten polymer interface and gas layer thickness and polymer melt flow rate were analyzed. Numerical results show that the die swell decreases and encapsulation phenomena increases with increasing gas pressure after the stable gas layer is established. The minimum gas pressure to found a stable gas layer decreases as the gas layer thickness increases and increases as the polymer melt flow rate increases.

    参考文献
    相似文献
    引证文献
引用本文

柳和生,邓小珍,黄益宾,黄兴元,赖家美.气体压力对气辅共挤成型界面的影响[J].高分子材料科学与工程,2014,30(3):119-123. Hesheng Liu, Xiaozhen Deng, Yibin Huang, Xingyuan Huang, Jiamei Lai. Effect of Air Pressure on Interface Profilein Gas-Assisted Coextrusion Process[J]. Polymer Materials Science & Engineering,2014,30(3):119-123.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2014-03-17
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司