左右旋螺筒结构对单螺杆挤出机性能的影响
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

北京理工大学基础研究基金(3100012211304)


Influence of Left and Right Hand Helically Grooved Barrels on the Performance of Single Screw Extruder
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    为了研究开有左、右旋螺槽的螺筒结构对单螺杆挤出机熔融段挤出混炼性能的影响,使用POLYFLOW 软件,数值模拟了硬质聚氯乙烯(PVC-R)熔体在左旋和右旋螺筒的单螺杆挤出机流道内的三维等温流场和挤出混合过程,研究了螺筒螺棱左右旋向对单螺杆挤出机挤出和混合性能的影响。研究结果表明,与右旋螺筒相比,左旋螺筒挤出熔体的轴向速度可达5mm/s,左旋结构流道内粒子混合指数大于0.5的区域和拉伸对数也更大,分离尺度更小,因此可提高挤出机挤出输送能力和混合性能。

    Abstract:

    In order to study the influence of left and right hand helically grooved barrels on extruding and mixing performance of the melting zone of single screw extruder, the 3D isothermal flow fields and mixing process in two single screw extruders with left and right hand helically grooved barrel respectively were numerically simulated by POLYFLOW. The influence of rotating direction of helical groove on extruding and mixing performance of single screw extruder was also studied. The results show that in contrast with that of the right hand helically grooved barrel, the extruding axial velocity of single screw extruder with left hand helically grooved barrel reaches 5 mm/s, the area of which mixing index of particles greater than 0.5 and the logarithm of area stretch are larger, and the segregation scale is smaller, thus the single screw extruder with left hand helically grooved barrel represents better delivery capacity and mixing performance.

    参考文献
    相似文献
    引证文献
引用本文

柳 娟,王 建.左右旋螺筒结构对单螺杆挤出机性能的影响[J].高分子材料科学与工程,2014,30(3):124-127. Juan Liu, Jian Wang. Influence of Left and Right Hand Helically Grooved Barrels on the Performance of Single Screw Extruder[J]. Polymer Materials Science & Engineering,2014,30(3):124-127.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2014-03-17
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司