Abstract:Acrylate emulsion was synthesized by semi-continuous self-generated seed per-emulsification. Butyl acrylate (BA), methyl methacrylate (MMA) and styrene (St) were copolymerized to form the main chain and acrylic acid (AA) was used as the functional monomer. Factors affecting emulsion properties were investigated in this article, namely, oil/water mass ratio in pre-emulsification, the content of seed emulsion, holding time, the ratio of hard monomer BA to MMA and ratio of soft to hard monomer. The results indicate that when the mass ratio oil/water is 1.8:1, mass ratio of seed emulsion to pre-emulsion is 1/3, mass ratio of St/MMA is 1:5.5 and the content of AA is 3%, the stability of copolymer emulsion is excellent, the particle size is little, the distribution of particle size is narrow and the water absorption of films is low. By tensile tests, differential scanning calorimeter (DSC) ,infrared spectroscopy (IR) and gel permeation chromatography (GPC), it is found that with the increase of soft/hard monomer ratio, the tensile strength and glass transition temperature (Tg) of the latex film decrease gradually, while its elongation at break increases gradually. The products are proved to be the target one with the particle size distribution between 114 nm to 290 nm and molecular weight distribution index is about 1.679.