双酚S和双酚A与碳酸二苯酯共聚合成阻燃性聚碳酸酯
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家科技支撑计划项目(2013BAC11B05)


Synthesis of Flame Retardant Polycarbonate by Melt Transesterification Copolymerization of Bisphenol S, Bisphenol A with Diphenyl Carbonate
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    以双酚S(BPS ) 、双酚A(BPA)和碳酸二苯酯(DPC)为单体,KOH 为催化剂,通过熔融酯交换法共聚合成阻燃性聚碳酸酯。通过热重分析及对力学强度的测试考察了BPS 与BPA 的摩尔比对产品的热性能和力学性能的影响。发现随着BPS 含量的增加,PC 的成炭率增加;KOH 、BPS 、BPA 、DPC 以5.0×10-4∶0.1∶0.9∶1.08 的摩尔比合成的PC 黏均相对分子质量为24638,热分解温度达419.5℃,S元素含量为0.84%,阻燃性能达到UL94V-0级。

    Abstract:

    By melt transesterification copolymerization, flame-retardant polycarbonate(PC)was synthesized from bisphenol S (BPS), bisphenol A (BPA) and diphenyl carbonate (DPC) using KOH as catalyst. The molar ratio of BPS to BPA on the thermal stability and mechanical properties of PC was investigated through TG and mechanical strength test. The results show that the charring rate increases with the increase of the content of BPS; when the molar ratio of KOH, BPS, BPA and DPC is 5.0 × 10-4: 0.1:0.9:1.08,the viscosity average relative molecular mass, the thermal decomposition temperature and the S-element content of the resulting product are 24638, 419.5 ℃, 0.84% respectively and the flame retardant rating reaches UL 94 V-0 level.

    参考文献
    相似文献
    引证文献
引用本文

张廷健,杨先贵,王公应,张建新,刘斌.双酚S和双酚A与碳酸二苯酯共聚合成阻燃性聚碳酸酯[J].高分子材料科学与工程,2014,30(4):22-25. Tingjian Zhang, Xiangui Yang, Gongying Wang, Jianxin Zhang, Bin Liu. Synthesis of Flame Retardant Polycarbonate by Melt Transesterification Copolymerization of Bisphenol S, Bisphenol A with Diphenyl Carbonate[J]. Polymer Materials Science & Engineering,2014,30(4):22-25.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2014-04-18
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司