RAFT聚合法合成聚甲基丙烯酸二甲氨基乙酯
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金资助项目(21064001);广西石化资源加工及过程强化技术重点实验室主任基金(11-B-02)


Synthesis of Poly[2-(N,N-Dimethylamino)Ethyl Methacrylate] by RAFT Polymerization
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    以甲基丙烯酸二甲氨基乙酯(DMAEMA)为单体,二硫代苯甲酸异丙苯酯(CBD)为链转移剂,偶氮二异丁腈(AIBN)为引发剂,甲苯为溶剂,通过可逆加成-断裂链转移(RAFT)聚合法合成了聚甲基丙烯酸二甲氨基乙酯(PDMAEMA)。利用红外光谱、核磁共振和凝胶渗透色谱对PDMAEMA 进行了表征,同时考察了聚合反应时间和温度、引发剂和链转移剂的浓度对聚合反应的影响。结果表明,随着聚合时间延长,单体转化率和聚合物相对分子质量增加,聚合反应动力学曲线呈很好的线性关系,相对分子质量分布窄;随着[CDB]/[AIBN]比例的增大,聚合反应速率、相对分子质量及其分布均下降;当聚合温度升高时,单体转化率和聚合物相对分子质量增加。

    Abstract:

    Poly[2-(N,N-dimethylamino)ethyl methacrylate] (PDMAEMA) was synthesized by reversible addition- fragmentation chain transfer (RAFT) polymerization of 2-(N,N-dimethylamino)ethyl methacrylate (DMAEMA) in toluene, using cumyl dithiobenzoate (CDB) as chain transfer agent, and 2,2’-azobisisobutyronitrile (AIBN) as initiator. PDMAEMA was characterized by FT-IR, 1H-NMR, and GPC. The effects of polymerization time, temperature, the concentration of initiator and chain transfer agent on the polymerization of DMAEMA were also investigated. The results show that the monomer conversion and the molecular weight of PDMAEMA increase with polymerization time, and the kinetic curve of the polymerization exhibits a good linear relationship, and the molecular weight distribution of PDMAEMA is narrow; the polymerization rate, molecular weight and its distribution decrease with the increasing of [CDB]/[AIBN] ratio; when the polymerization temperature is rised, the monomer conversion and the molecular weight of PDMAEMA increase.

    参考文献
    相似文献
    引证文献
引用本文

李光华,林光川,王广东,朱园勤,汪春英,黄义忠. RAFT聚合法合成聚甲基丙烯酸二甲氨基乙酯[J].高分子材料科学与工程,2014,30(4):30-34. Guanghua Li, Guangchuan Lin, Guangdong Wang, Yuanqin Zhu, Chunying Wang, Yizhong Huang. Synthesis of Poly[2-(N, N-Dimethylamino)Ethyl Methacrylate] by RAFT Polymerization[J]. Polymer Materials Science & Engineering,2014,30(4):30-34.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2014-04-18
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司