聚丙烯对SEBS弹性体的改性作用与结晶行为
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金资助项目(51173107)


Crystallization Behaviors of Polypropylene in SEBS Elastomer Compounds
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    选用聚丙烯PP-S700,使用密炼机制备了苯乙烯-乙烯/丁烯-苯乙烯(SEBS)/聚丙烯(PP)弹性体共混材料。通过差示扫描量热法研究了聚丙烯PP在SEBS弹性体中的结晶行为;利用广角X 射线衍射初步探讨了聚丙烯PP结晶在SEBS弹性体中的取向性,计算得到了PP的取向度。研究结果表明,SEBS/PP共混材料随着PP含量的增加由弹性体转化为硬弹性体,PP分散相逐渐连接,与SEBS形成双连续相,使材料的力学强度、储能模量显著提高,且降低了因PP的引入而对弹性体断裂伸长率的影响。在SEBS/PP弹性体共混材料中PP的结晶温度、结晶度都会随着SEBS含量的增加而降低。在注塑成型过程中,SEBS/PP弹性体共混材料的大分子链沿注塑成型方向取向。

    Abstract:

    Styrene-hydrogenated butadiene -styrene copolymer (SEBS)/ polypropylene (PP) compounds were prepared with PP-S700 by internal mixer. The crystallization behaviors of PP in SEBS/PP elastomers were investigated by DSC. The crystallization orientation of PP in SEBS/PP elastomers was studied through XRD, and the degree of crystallization orientation was obtained. The results show that with increase of the PP content, SEBS/PP compounds change from an elastomer to a hard elastomer, as the dispersed PP phases gradually connect with each other to form two continuous phases with SEBS, leading to a remarkable increase in mechanical strength and storage modulus of SEBS/PP compounds. In addition, the formation of the two continuous phases partly makes the negative impact of PP on the elongation at break decrease. In the SEBS/PP elastomer, the crystallization temperature and crystallinity of PP both decrease with the content of SEBS. During the injection molding, the long chain orientation is along the direction of injection.

    参考文献
    相似文献
    引证文献
引用本文

钱 微,李 颖,王 霞,孙 静,杨 帆.聚丙烯对SEBS弹性体的改性作用与结晶行为[J].高分子材料科学与工程,2014,30(4):50-54. Wei Qian, Ying Li, Xia Wang, Jing Sun, Fan Yang. Crystallization Behaviors of Polypropylene in SEBS Elastomer Compounds[J]. Polymer Materials Science & Engineering,2014,30(4):50-54.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2014-04-18
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司