SU-8光刻胶玻璃化转变温度及力学性能的分子动力学模拟
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家重点基础研究发展规划项目(2011CB302101,2011CB302105);国家自然科学基金资助项目(51175056)


Molecular Dynamics Simulation on the Mechanical Properties and Glass Transition Temperature of SU-8 Photoresist
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    基于COMPASS分子力场,经过分子聚合,能量最小化和退火模拟等构建SU-8光刻胶模型。利用分子动力学的研究方法,模拟研究了SU-8胶的玻璃化转变温度及其主要的影响因素;同时计算了在室温条件下交联SU-8胶的杨氏模量、泊松比、剪切模量、体积模量等力学性能。结果表明,模拟得到的玻璃化转变温度和力学性能与实验结果相一致;非键能是导致非交联SU-8胶玻璃化转变的主要因素之一。

    Abstract:

    Based on Compass molecular field, SU-8 photoresist models were built with employing molecule polymerization, energy optimization and anneal simulation. Molecular dynamic simulation was also applied to observe the glass transition temperature of SU-8 photoresist models and the main influencing factors. Meanwhile, mechanical properties of cross-linking SU-8 photoresist model at room temperature were investigated by calculating the elastic modulus, Poisson’s ratio, shear modulus, bulk modulus, etc. The results show that the glass-transition temperature and the mechanical properties in simulation are consistent with the experiment results; non-bond energy is one of the main causes of the non-cross-linking SU-8 photoresist models glass transition.

    参考文献
    相似文献
    引证文献
引用本文

尚海鑫,褚金奎,高佳丽. SU-8光刻胶玻璃化转变温度及力学性能的分子动力学模拟[J].高分子材料科学与工程,2014,30(4):95-99. Haixin Shang, Jinkui Chu, Jiali Gao. Molecular Dynamics Simulation on the Mechanical Properties and Glass Transition Temperature of SU-8 Photoresist[J]. Polymer Materials Science & Engineering,2014,30(4):95-99.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2014-04-18
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司