酚醛树脂热分解非等温动力学机理函数推测
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:


Suggestion of the Non-Isothermal Decomposition Kinetic Mechanism Function for Phenolic Resin
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    通过热重分析法研究了S-157酚醛树脂的热分解反应。结果表明,S-157树脂耐热性较普通酚醛树脂好,起始分解温度约为615.7K。Kissinger法、Ozawa法计算得到该树脂热分解活化能分别为210.6kJ/mol和208.2kJ/mol,反应频率因子约为2.81×1013。S-157树脂热分解可分为3个阶段,当转化率(αT)小于40%时,活化能(E)随着αT 增大而逐渐变小;当αT 在40%~55%之间时,E 随着αT 增大而相对快速增大;当αT 大于55%以后,E 随着αT 增大而缓慢增大。通过Coats-Redfern非等温积分法推断出S-157树脂热分解反应初期的反应机理为扩散反应,末期时为化学反应,期间为过渡阶段。

    Abstract:

    The thermal decomposition of phenolic resin S-157 in N2 was studied by TG-DTG. The results show that the resin S-157 has better heat resistance than common phenolic resin. The thermal decomposition apparent activation energy (E) is 210.6 kJ/mol by Kissinger equation and 208.2 kJ/mol by Ozawa equation. The thermal decomposition of the resin S-157 can be divided into three stages. The most probable kinetic mechanism function was suggested by Coats-Redfern method. During the initial reaction stage, of which the conversion ratio(αT) for the resin S-157 is less than 40%, E decreases with increase of αT, and the thermal decomposition mechanism is diffusion reaction. During the final reaction stage, of which αT is larger than 55%, the thermal decomposition mechanism is chemical reaction, and E slowly increases with increase of αT. During the transition stage, of which αT is 40%~55%, E rapidly increases with increase of αT.

    参考文献
    相似文献
    引证文献
引用本文

魏化震,张清辉,李锦文,李传校,齐风杰,张俊华,李增翼.酚醛树脂热分解非等温动力学机理函数推测[J].高分子材料科学与工程,2014,30(4):100-105. Huazhen Wei, Qinghui Zhang, Jinwen Li, Chuanxiao Li, Fengjie Qi, Junhua Zhang, Zengyi Li. Suggestion of the Non-Isothermal Decomposition Kinetic Mechanism Function for Phenolic Resin[J]. Polymer Materials Science & Engineering,2014,30(4):100-105.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2014-04-18
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司