聚合物气辅共挤成型中气体入口位置对层间界面的影响
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金资助项目(51163011);江西省自然科学基金资助项目(20114BAB206026);江西省青年科学基金资助项目(20122BAB216012);上饶师范学院博士科研启动基金(001026)


Effects of Gas Inlet Position on Interface in Gas-Assisted Co-Extrusion
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    基于流变学基本方程和PhanThien-Tanner(PTT)本构方程,针对不同气体入口位置,建立了矩形截面双层型材气辅共挤出的三维非等温粘弹有限元模型;使用粘弹应力分离法(EVSS)和非协调流线迎风法(SU)等有限元方法,对共挤界面进行了数值模拟,分析了气体入口位置对界面粘性包覆及剪切应力的影响规律。结果表明,随着气体入口位置与口模入口面之间距离的增加,界面粘性包覆程度和气体入口处界面上的剪切应力峰值均增大,而共挤界面上最大剪切应力值均在口模入口面上,其大小与气体入口位置几乎无关。先汇料后进气的气辅口模结构不利于共挤制品界面质量控制。

    Abstract:

    For different gas inlet position, 3D non-isothermal viscoelastic finite element(FEM) model was established based on fundamental equations of rheology and Phan Thien-Tanner(PTT) constitutive model for a rectangular shaped bilayer co-extrusion polymer profile. Numerical simulations on co-extrusion interfaces were performed by finite element methods such as elastic-viscous-split-stress method (EVSS), streamline-upwind (SU) method and so on. The effect of law of gas inlet position on encapsulation and shear stress was analyzed. The results show that the degree of encapsulation and the peak shear stress at gas inlet plane increases with the distance between gas inlet plane and entrance plane of the die increasing, the maximum shear stress of the interfaces are all at entrance plane of the die, and almost unassociates with gas inlet position. The gas-assisted co-extrusion will not be good for the interface quality of co-extrusion product if gas enter the die after the joining of two polymer melts.

    参考文献
    相似文献
    引证文献
引用本文

黄益宾,柳和生,熊爱华,余 忠.聚合物气辅共挤成型中气体入口位置对层间界面的影响[J].高分子材料科学与工程,2014,30(4):115-118. Yibin Huang, Hesheng Liu, Aihua Xiong, Zhong Yu. Effects of Gas Inlet Position on Interface in Gas-Assisted Co-Extrusion[J]. Polymer Materials Science & Engineering,2014,30(4):115-118.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2014-04-18
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司