基于响应曲面和遗传算法的工艺参数优化
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:


Process Parameters Optimization Based on Response Surface Methodology and Genetic Algorithm
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    注塑工艺参数严重影响薄壳类塑件的翘曲变形。文中以汽车遮阳板为例,运用中心复合设计(CCD)和Moldflow分析获得大量的实验数据,然后利用响应曲面法建立工艺参数和优化目标之间的多元回归模型,通过方差分析表明预测模型的有效性,最后结合遗传算法对含有惩罚项的数学模型进行寻优,实现工艺参数的优化,从而降低塑件的翘曲变形。

    Abstract:

    Warpage of thin plastic products is influenced by injection processing parameters severely such as a sun visor studied in the paper. It can be minimized by optimizing processing parameters. First of all, a certain number of experiment programs were derived from center composite experiment, then they were simulated by Moldflow with writing down the size of warpage, and then multiply regression model was built between processing and objection by response surface methodology, which made use of the theory of the least square method. After verifying the valid of the model by variance analysis, the best processing parameters combination could be gained by utilizing genetic algorithm to the prediction model with penalty terms.

    参考文献
    相似文献
    引证文献
引用本文

傅厦龙,胡夏夏.基于响应曲面和遗传算法的工艺参数优化[J].高分子材料科学与工程,2014,30(4):123-126. Xialong Fu, Xiaxia Hu. Process Parameters Optimization Based on Response Surface Methodology and Genetic Algorithm[J]. Polymer Materials Science & Engineering,2014,30(4):123-126.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2014-04-18
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司