纤维含量对注塑制品残余应力影响的数值模拟
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:


Numerical Simulation of the Effect of Fiber Content on Residual Stresses in Fiber Reinforced Injection Molding
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    采用短纤维增强尼龙6复合材料,对带有半圆形缺口平板制件的注塑成型过程进行了模拟。以制件半圆形缺口附件的5个单元为研究对象,分别获得了不同位置上纤维取向和制件脱模时应力沿厚度方向上的变化,深入讨论了模具外形、纤维含量变化对纤维取向以及残余应力的影响。研究结果表明,随着纤维含量的增加,纤维间相互作用系数Ci减小,取向程度升高,皮层取向厚度减小,芯层取向厚度增加;纤维含量越高,制品冷却时沿厚度方向的压力幅值越大,残余应力沿厚度分布幅值也越大;制件形状的改变,影响了熔体流经此处的流动状态,同时也影响了缺口附件纤维取向以及残余应力。

    Abstract:

    The injection process of notched plate with short-fiber-reinforced(SFR) polyamide composites was simulated by commercial software Moldflow. The five different elements in the proximity of the notch were studied to attain fiber orientation and stress distribution at ejection through the thickness, and the effects of fiber content and mold shape change on residual stresses in fiber reinforced injection molding were in-depth analyzed. Results show that with increase of the fiber content, the fibers interaction coefficient Ci decreases; larger values for Ci, tend to make the fiber orientation close to a random in-plane distribution whereas lower values predict a clear alignment in the flow direction; Ci also affects the thickness of the core and shell layers, decreasing the core and increasing the shell thickness as Ci is increased. As the fiber content increases, the magnitude of the coolant pressure and the residual stresses of the part through the thickness at ejection increase; fiber orientation and stress distribution are also affected by the cross-sectional shape change in the proximity of the notch.

    参考文献
    相似文献
    引证文献
引用本文

赵 建,曲敏杰,夏 英,郭 静,冯 钠,张勤星.纤维含量对注塑制品残余应力影响的数值模拟[J].高分子材料科学与工程,2014,30(4):127-131. Jian Zhao, Minjie Qu, Ying Xia, Jing Guo, Na Feng, Qinxing Zhang. Numerical Simulation of the Effect of Fiber Content on Residual Stresses in Fiber Reinforced Injection Molding[J]. Polymer Materials Science & Engineering,2014,30(4):127-131.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2014-04-18
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司