微乳液法制备成核剂对聚丙烯改性的影响
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:


Polypropylene Modified with Nucleating Agent Through Microemulsion Method
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    采用微乳液作为成核剂载体将苯甲酸钠加入聚丙烯,研究其对聚丙烯力学性能及结晶行为的影响。将成核剂苯甲酸钠溶解于水中作为水相,与油相Marcol-52、表面活性剂吐温60和助表面活性剂正己醇共混,制备了一种含有苯甲酸钠成核剂的微乳液。将苯甲酸钠微乳液和成核剂粉末分别加入聚丙烯中熔融共混后测试。力学性能、小角X射线散射、偏光显微镜及差示扫描量热仪等结果表明,与苯甲酸钠粉末比较,采用微乳液法将成核剂分散到聚丙烯中,能够使聚丙烯获得更高的取向度、弯曲弹性模量和弯曲强度,而且成核剂能在聚丙烯结晶过程中产生更多的晶核,提高了聚丙烯的结晶度。

    Abstract:

    The effect of sodium benzoate(SB) nucleating agent using microemulsion as nano-vehicle on the mechanical properties and crystallization behavior of polypropylene was studied. SB was solubilized by adding predetermined amount of water, mineral oil, 1-hexanol and Tween 60 dropwise to obtain a single-phase microemulsion. Both SB microemulsion and SB powder were used for PP modification through melt compounding. The results of mechanical properties, small angle X-ray scattering(SAXS), polarizing microscope (POM)and DSC show that the microemulsion method can improve the dispersion of nucleating agent and the orientation of PP. The flexural strength and moduli of PP modified with SB microemulsion are much higher than those of PP modified with SB powder using conventional mixing method. More crystal nuclei can be formed during the crystallization of PP and the crystallinity of PP is further increased when SB was loaded by microemulsion method compared with used in powder form.

    参考文献
    相似文献
    引证文献
引用本文

郭 敏,李晋庆,罗运军,张德鹏,潘国元,张 杨,严 昊,刘轶群.微乳液法制备成核剂对聚丙烯改性的影响[J].高分子材料科学与工程,2014,30(4):132-138. Min Guo, Jinqing Li, Yunjun Luo, Depeng Zhang, Guoyuan Pan, Yang Zhang, Hao Yan, Yiqun Liu. Polypropylene Modified with Nucleating Agent Through Microemulsion Method[J]. Polymer Materials Science & Engineering,2014,30(4):132-138.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2014-04-18
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司