碳酸钙高填充聚对苯二甲酸己二酸丁二醇酯可降解复合材料的制备及性能表征
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:


Application of CaCO3 High Loaded Poly Buteylene Adipate-co-Terephthalate(PBAT)
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    以生物降解塑料聚对苯二甲酸己二酸丁二醇酯(PBAT)为基材,以50%表面改性的CaCO3为填充物制备出具有较好吹膜性能的可降解高填充复合材料。研究结果表明,随着CaCO3添加量的增加,CaCO3/PBAT 复合材料的拉伸性能出现先提高后降低的趋势,而偶联剂KH560以及增溶剂ADR的使用则可以明显提高CaCO3/PBAT(50%)复合材料的拉伸性能,且在偶联剂使用量为2.0%,增容剂为1.0%时,复合材料的拉伸性能达到最佳,CaCO3/PBAT(50%)薄膜制品的横向拉伸强度可达20.10 MPa,纵向拉伸强度可达21.73 MPa,横向断裂伸长率为648%,纵向断裂伸长率为528%,熔融指数为1.58g/10min。通过SEM 对薄膜表面进行观察,发现CaCO3分布均匀,完全被PBAT浸润包覆。复合材料满足市场包装材料的力学性能要求,大幅度降低了PBAT的使用成本,具有良好的应用前景。

    Abstract:

    In this study, poly buteylene adipate-co-terephthalate (PBAT) resin as base material was loaded with 50% surface modified CaCO3 to prepare high load biodegradable composites. The results show that with the increase of the amount of CaCO3 in the composites, the tensile properties improve fist and then decrease. While the application of coupling agent KH560 and compatibilizer ADR can significantly improve the tensile properties of CaCO3/PBAT(50%) composite. When the amount of KH560 and ADR is 2.0% and 1.0% respectively, the transverse tensile strength is up to 20.10 MPa, the longitudinal elongation is up to 21.73 MPa, the transverse elongation is 648%, the longitudinal elongation is 528%, and the melting index is only 1.58 g/10min, which can meet the mechanical requirements of the market packaging material and greatly reduce the utilization cost of PBAT. For the all above, these new kind biodegradable composites have good application potential on packaging in the future.

    参考文献
    相似文献
    引证文献
引用本文

杨 冰,季君晖,许 颖,张长安,张以河,张自强,李玉荣.碳酸钙高填充聚对苯二甲酸己二酸丁二醇酯可降解复合材料的制备及性能表征[J].高分子材料科学与工程,2014,30(4):139-142. Bing Yang, Junhui Ji, Ying Xu, Chang’an Zhang, Yihe Zhang, Ziqiang Zhang, Yurong Li. Application of CaCO3 High Loaded Poly Buteylene Adipate-co-Terephthalate(PBAT)[J]. Polymer Materials Science & Engineering,2014,30(4):139-142.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2014-04-18
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司