一种韧性固化剂的制备及其性能
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金资助项目(51073129)


Preparation and Properties of a Flexible Curing Agent
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    以低相对分子质量环氧树脂、双酚A和柔性链羧酸为原料采用两步法合成一种用于粉末涂料的韧性固化剂。用傅里叶红外光谱和凝胶渗透色谱对产物结构进行表征,测试粉末涂料的凝胶时间和力学性能,采用差示扫描量热分析研究涂料体系的固化动力学。结果表明,柔性链羧酸成功接入到固化剂中,合成的固化剂羟基值为0.55mol/100g~0.65mol/100g,软化点为90℃~98℃时;180℃凝胶时间为21s,冲击韧性为50kg·cm,附着力为0级。固化体系的表观活化能(Ea)为76.83kJ/mol,反应级数(n)为0.92。

    Abstract:

    Low molecular weight epoxy resin, bisphenol A and flexible chain carboxylic acid were used to synthesize a flexible curing agent used in powder coating by two-step method. The structure was characterized by Fourier transforms infrared spectrometer (FT-IR) and gel permeation chromatography (GPC). The mechanical properties and gel time of the powder coating were tested. The curing kinetics was studied through differential calorimetric analysis (DSC). As a result, modified reagent was successfully grafted onto the curing agent. The hydroxyl value is 0.55 mol/100g~0.65 mol/100g, softening point is 90 ℃~98 ℃; gel time is 21 s at 180 ℃, impact toughness is 50kg·cm, and adhesive force level is 0 degree. The apparent activation energy of the curing system is 76.83 kJ/mol and the reaction order is 0.92.

    参考文献
    相似文献
    引证文献
引用本文

郑亚萍,郑国兵,陈 超,屈 萍,李沛沛,吴一蔚.一种韧性固化剂的制备及其性能[J].高分子材料科学与工程,2014,30(4):162-167. Yaping Zheng, Guobing Zheng, Chao Chen, Ping Qu, Peipei Li, Yiwei Wu. Preparation and Properties of a Flexible Curing Agent[J]. Polymer Materials Science & Engineering,2014,30(4):162-167.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2014-04-18
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司