电纺丝技术制备聚乙二醇/聚乙烯吡咯烷酮相变纳米纤维及其性能
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

北京市教育委员会科技发展计划面上项目资助;北京市属高等学校高层次人才引进与培养计划项目-青年拔尖人才项目


Performance of Polyethylene Glycol/ Polyvinylpyrrolidone Phase Change Ultrafine Nanofibers Prepared by Electrospinning
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    采用静电纺丝技术以聚乙烯吡咯烷酮(PVP)为载体基质,聚乙二醇(PEG)为相变材料合成了一种相变纳米纤维。考察了溶液浓度、纺丝电压、接收距离等对静电纺丝效果的影响。对于不同PEG相对分子质量,以及混合溶液中不同的PEG含量对于纳米纤维形态及直径的影响进行了研究,研究结果显示,相变纳米纤维呈现圆柱形状而且表面比较光滑,纳米纤维的直径在370nm~620nm,而且,纳米纤维的直径随着PEG含量和PEG 相对分子质量的增加呈现增大的趋势。同时,用差示扫描量热法测试了相变纳米纤维的相变温度,其值与PEG含量有关。

    Abstract:

    Ultrafine fibers of polyethylene glycol/ polyvinylpyrrolidone (PEG/PVP) composite in which PEG acts as model phase change material (PCM) and PVP acts as supporting material, were successfully prepared via electro-spinning as phase change materials. The effect of electro-spinning factors including the concentration of spinning solution,the collect distance and the spinning voltage on the morphology of the fibers was studied. The effect of PEG content and its molecular weight on morphology of the PEG /PVP composite fibers was studied. The morphology observation from the composite fibers reveals that the fibers are cylindrical and have smooth external surface, and with increase of PEG content and its molecular weight, the average diameters of PEG/PVP phase change fibers increase from 370 nm to 620 nm. The phase change properties of composite fibers were tested by DSC. The result indicates that Tm is affected by different ratios of PEG component.

    参考文献
    相似文献
    引证文献
引用本文

师奇松,陈三宽,刘太奇.电纺丝技术制备聚乙二醇/聚乙烯吡咯烷酮相变纳米纤维及其性能[J].高分子材料科学与工程,2014,30(4):176-178. Qisong Shi, Sankuan Chen, Taiqi Liu. Performance of Polyethylene Glycol/ Polyvinylpyrrolidone Phase Change Ultrafine Nanofibers Prepared by Electrospinning[J]. Polymer Materials Science & Engineering,2014,30(4):176-178.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2014-04-18
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司