氯乙酰和氯甲基聚苯乙烯在葡甲胺衍生过程中反应性能的比较
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

“973”项目(2013CB733504);“863”项目(2012AA021203)


Reactive Performance Comparison of Chloroacetyl Polystyrene and Chloromethyl Polystyrene in Meglumine Derivatization Procedure
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    研究了氯乙酰聚苯乙烯树脂(PS-acyl-Cl)在葡甲胺(MG)衍生化过程中的反应。结果表明,当反应温度为60 ℃,MG的用量为n(MG)/n(Cl)=2/1,反应时间为15min,N,N-二甲基甲酰胺(DMF)为溶剂且用量为5.2mL/gMG时,制备得到的酰乙基葡甲胺树脂(PS-acyl-MG)其MG担载量最高。与氯甲基葡甲胺树脂(硼特效树脂)相比具有反应时间短、温度低、MG和DMF用量少、-Cl的转化率高等优点;得到的PS-acyl-MG 用作吸硼树脂,由于同时含有酰乙基胺与邻羟基基团的协同作用,对硼的吸附量可达到28.1mg/g干树脂,其基团吸硼利用率可达100%,高于硼特效树脂近1倍。

    Abstract:

    The effect of reaction conditions on the synthesis of chloroacetyl polystyrene (PS-acyl-Cl) with meglumine (MG) was studied. The results show that the MG loading amount of the obtained PS-acyl-MG is the highest when the reaction temperature is 60 ℃, MG in an amount of n(MG)/n(Cl) is 2/1, the reaction time is 15 min, solvent is N,N-dimethylformamide (DMF), and the amount of DMF is 5.2 mL/g MG. The reaction of PS-acyl-Cl with MG needs lower temperature, shorter time, less dosage of MG and DMF, and a higher percent conversion of -Cl than PS-CH2-Cl which can be used to prepare the boron specific adsorption resin. Because α-acetyl-amine and orth-dihydroxy have synergy adsorption of boron, and the maximum boron adsorption capacity of PS-acyl-MG can be up to 28.1 mg/g and the utilization of functional groups can be achieved 100%, which is twice as high as that of the boron specific adsorption resin.

    参考文献
    相似文献
    引证文献
引用本文

顾爱喜,刘晓宁,张家宏,陈怡露,魏荣卿,郑 涛.氯乙酰和氯甲基聚苯乙烯在葡甲胺衍生过程中反应性能的比较[J].高分子材料科学与工程,2014,30(5):16-19. Aixi Gu, Xiaoning Liu, Jiahong Zhang, Yilu Chen, Rongqing Wei, Tao Zheng. Reactive Performance Comparison of Chloroacetyl Polystyrene and Chloromethyl Polystyrene in Meglumine Derivatization Procedure[J]. Polymer Materials Science & Engineering,2014,30(5):16-19.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2014-05-15
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司