聚丁二烯-聚四氢呋喃三嵌段共聚物的合成与热性能
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

工业和信息化部重点项目(J142011A001);国家自然科学基金资助项目(21274116)


Synthesis and Thermal Properties of Poly(Tetrahydrofuran)-Poly(Butadiene)-Poly(Tetrahydrofuran) Triblock Copolymer
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    以端羟基聚丁二烯(HTPB)为引发剂,在三氟化硼乙醚(BF3·OEt2)的催化作用下,利用四氢呋喃(THF)的阳离子开环聚合制备PTHF-PB-PTHF三嵌段共聚物。利用红外光谱、核磁氢谱、碳谱及凝胶渗透色谱-激光光散射联用仪证实了其大分子结构与分子设计一致且相对分子质量可控。聚合工艺研究表明,催化剂用量对聚合反应的影响较小,嵌段共聚物相对分子质量随单体与引发剂配比的增大而提高。利用热重分析仪及差示扫描热分析研究了聚合产物的热稳定性及低温玻璃化转变行为,结果表明,产物具有较好的热稳定性,其玻璃化转变温度可达-80℃以下。

    Abstract:

    Poly(tetrahydrofuran)-poly(butadiene)-poly(tetrahydrofuran) triblock copolymer was synthesized by cationic ring-opening polymerization of tetrahydrofuran in the presence of hydroxyl-terminated polybutadiene as macroinitiator and boron trifluoride etherate as catalyst. The results of FT-IR, 1H-NMR, 13C-NMR and size exclusion chromatography/multi-angle laser light scattering (SEC) reveal that the chemical structure of resulting copolymers is consistent with design and the molecular weight can be controlled. Study of the polymerization process represents the minor impact of catalyst on the polymerization reaction, and shows that the molecular weight of the copolymers increases with increase of the monomer to initiator ratio. TGA and DSC was used to study the thermal stability and glass transition temperature of the products. The results suggest that the products exhibit excellent thermal stability, and the glass transition temperature can be lower than -80 ℃.

    参考文献
    相似文献
    引证文献
引用本文

张万斌,范晓东,范伟伟,朱秀忠,白 阳.聚丁二烯-聚四氢呋喃三嵌段共聚物的合成与热性能[J].高分子材料科学与工程,2014,30(5):34-38. Wanbin Zhang, Xiaodong Fan, Weiwei Fan, Xiuzhong Zhu, Yang Bai. Synthesis and Thermal Properties of Poly(Tetrahydrofuran)-Poly(Butadiene)-Poly(Tetrahydrofuran) Triblock Copolymer[J]. Polymer Materials Science & Engineering,2014,30(5):34-38.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2014-05-15
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司