醋酸纤维素/蒙脱土生物纳米复合材料的结构与力学性能
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

四川大学青年教师启动基金(2012SCU11075);国家自然科学基金资助项目(51203106)


Microstructure and Mechanical Properties of Cellulose Acetate/Montmorillonite Bio-Based Nanocomposites
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    采用熔融插层法在聚乙二醇的增塑作用下制备了醋酸纤维素/蒙脱土(CA/MMT)生物纳米复合材料。利用X射线衍射和透射电镜表征了CA/MMT纳米复合材料的插层结构。X射线衍射结果表明,复合后蒙脱土的层间距增大;透射电镜照片显示,蒙脱土在CA基体中达到纳米级分散,且分散均匀。CA/MMT纳米复合材料的力学性能得到较大提高,加入5phr有机蒙脱土时,复合材料的拉伸强度从纯增塑CA的38.8MPa增到48.2MPa。动态力学测试表明复合材料的储能模量增大,玻璃化转变温度提高。

    Abstract:

    Cellulose acetate/montmorillonite(CA/MMT) bio-based nanocomposites were prepared by melt intercalation method with plasticizer polyethylene glycol 300. The microstructure and mechanical properties of CA/MMT nanocomposites were studied. The analysis of TEM and XRD indicates that montmorillonite is intercalated and well disperses into CA matrix. Due to the typical intercalated structures, the mechanical properties of the nanocomposites are improved significantly as compared with those of virgin plasticized CA. The tensile strength increases from 38.8 MPa to 48.2 MPa with adding 5% OMMT. With the addition of MMT, the storage modulus, glass transition temperature and heat deflection temperature of CA/MMT composites increase.

    参考文献
    相似文献
    引证文献
引用本文

王 彬,陈金耀,亢 健,曹 亚.醋酸纤维素/蒙脱土生物纳米复合材料的结构与力学性能[J].高分子材料科学与工程,2014,30(5):48-51. Bin Wang, Jinyao Chen, Jian Kang, Ya Cao. Microstructure and Mechanical Properties of Cellulose Acetate/Montmorillonite Bio-Based Nanocomposites[J]. Polymer Materials Science & Engineering,2014,30(5):48-51.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2014-05-15
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司