Abstract:UV curing time has a significant impact on the electro-optical properties and micro-morphology of polymer dispersed liquid crystals (PDLC) films used as liquid crystal/ polymer composite materials. Polystyrene (PS) was synthesized through reversible additional-fragmental chain transfer (RAFT) polymerization and employed to initiate methyl acrylate (MA) until the polymer and liquid crystal were well phase separated. PDLC films were prepared by polymerization induced phase separation (PIPS). The effect of UV curing time on threshold voltage, saturate voltage, off-state transmittance, memory effect, maximum transmittance and micro-morphology of RAFT dependent PDLCs was studied systematically and the mechanism was also discussed. It is found that with increase of the curing time, the threshold voltage increases from 1V to 6.5V,the saturate voltage increases from 11.1V to 24.1V, which can be contributed to increase of inter molecular forces between liquid crystals and polymer and the tightness of polymer network instead of insufficient movement capabilities of polymer chains. In addition, the off-state transmittance decreases from 19.6% to 2.2% because of a complete phase separation, while the maximum transmittance also decreasing from 77.3% to 58.5% can be contributed to the decline of matching degree of index between liquid crystals and polymer. The increase of curing time also leads to higher molecular weight, which means less memory effect.