癸二酸改性丁二酸丁二醇基聚酯材料的结晶性能和降解性能
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:


Crystallinity and Degradability of Poly(ButyleneSuccinate-co-ButyleneSebacate)
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    以癸二酸、丁二酸为二元酸,丁二醇为二元醇,通过熔融共聚的方式合成了聚(癸二酸丁二醇酯丁二酸丁二醇酯)无规共聚物(SE10)和聚丁二酸丁二醇(PBS),并通过酶解实验研究了相对分子质量、结构、表面形态的变化。通过红外光谱、差示量热扫描仪、偏光显微镜、凝胶色谱和扫描电镜对二者降解前后性能进行了研究,相比PBS,SE10晶体直径较小,晶体结构形态变模糊,结晶度由68.0%下降为45.7%,熔点由115.23℃下降为92.40℃。90d后SE薄膜的质量损失率达到63%,Mw 由34700降为11500,而PBS质量损失率为27%,Mw 由49000降为33000。表明癸二酸的引入降低了PBS的结晶性能,提高了其降解性能。

    Abstract:

    Novel poly(butylene succinate-co-butylene sebacate)(SE10) random copolyesters based on 1,4-succinic acid,1,4-butanediol and sebacic acid and poly(butylene succinate)(PBS) were synthesized by the thermal polycondensation. The products were characterized by IR, DSC,POM,GPC and SEM. The influence on crystallinity and degradability of the copolymers were studied. The surface morphology, molecular weight and structure change of the copolymer before and after enzymatic degradation were researched. Compared with that of PBS, the diameter of SE10 is smaller and the crystal structure configuration gets ambiguous. The crystallinity reduces from 68.0%(PBS) to 45.7%(SE10) and the melting point drops from 115.23 ℃(PBS) to 92.4 ℃(SE10). The mass loss rate of the SE10 film is 63% and Mw of SE10 drops from 34700 to 11500 in 90 d, but the mass loss rate of PBS is 27% and Mw drops from 49000 to 33000. It indicates that the introduction of sebacic acid reduces the crystallization property and improves the degradation performance of the material.

    参考文献
    相似文献
    引证文献
引用本文

康宗华,王昌禄,李贞景,陈勉华.癸二酸改性丁二酸丁二醇基聚酯材料的结晶性能和降解性能[J].高分子材料科学与工程,2014,30(5):62-66. Zonghua Kang, Changlu Wang, Zhenjng Li, Mianhua Chen. Crystallinity and Degradability of Poly(ButyleneSuccinate-co-ButyleneSebacate)[J]. Polymer Materials Science & Engineering,2014,30(5):62-66.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2014-05-15
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司