聚乙烯的降解氧化及对高密度聚乙烯/尼龙6共混物形态和性能的影响
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金资助项目(51073109)


Effect of Oxidation Degradation of Polyethylene on Morphology and Mechanical Property of High Density Polyethylene/Polyamide 6 Blends
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    采用将高密度聚乙烯(HDPE)先无氧热降解后氧气氧化的方式制备了氧化降解聚乙烯(ODPE),利用红外光谱等方法研究了氧化时间对ODPE中极性基团的种类和含量及ODPE含量对HDPE/PA6体系相形态和力学性能的影响。结果表明,在相对分子质量较低的ODPE链上引入了-OH、-C=O、-COOH等极性基团且随氧化时间延长,极性基团含量明显升高,其中羧基含量可达到0.069mmol/g。随ODPE含量升高,HDPE/PA6共混体系的分散相粒径有明显的细化,粒径分布变窄,相界面变得模糊;共混材料的强度和韧性可同时得到明显的提高。

    Abstract:

    High density polyethylene (HDPE) was first thermal degraded and then oxidized by oxygen to prepare oxidation degradation polyethylene (ODPE). The effect of oxidation time on the type and content of the polar groups as well as the effect of the content of ODPE on morphology and mechanical properties of HDPE/ polyamide 6(PA6) blends were investigated by FT-IR and other methods. The results show that hydroxyl, ester, carboxyl and other polar groups are introduced onto the molecular chain with lower molecular weight, in addition, the content of polar groups increases and even the content of carboxyl reaches 0.069 mmol/g as oxidation time prolonging. With increase of the content of ODPE, the particle size of HDPE/PA6 blends decreases, dispersion becomes more uniform and the morphological interface between PA6 and HDPE also becomes fuzzy. The strength and toughness of blends can be improved effectively at the same time.

    参考文献
    相似文献
    引证文献
引用本文

徐甲明,高玉宝,谢邦互,杨 伟,杨鸣波.聚乙烯的降解氧化及对高密度聚乙烯/尼龙6共混物形态和性能的影响[J].高分子材料科学与工程,2014,30(5):77-80. Jiaming Xu, Yubao Gao, Banghu Xie, Wei Yang, Mingbo Yang. Effect of Oxidation Degradation of Polyethylene on Morphology and Mechanical Property of High Density Polyethylene/Polyamide 6 Blends[J]. Polymer Materials Science & Engineering,2014,30(5):77-80.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2014-05-15
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司