二丙基次磷酸铝对尼龙6的阻燃作用
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

山东省自然科学基金资助项目(ZR2012BM017)


Flame Retardancy of Aluminium Dipropylphosphinate in Nylon 6
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    通过极限氧指数测定、垂直燃烧实验和锥型量热分析研究了二丙基次磷酸铝(ADPP)对尼龙6(PA6)的阻燃作用。结果表明,ADPP对PA6具有良好的阻燃效果。当ADPP添加量为15%时,阻燃PA6的LOI就高达30.7%,阻燃等级达V-0。与未阻燃PA6相比,燃烧时的热释放速率和质量损失速率显著降低,但累计热释放量略有增大。热重和残余物分析结果表明,ADPP是通过气相和凝聚相同时产生阻燃作用的。一方面它通过分解成不挥发性磷酸铝和促进PA6成炭,形成膨胀层而产生阻燃作用;另一方面,它分解成挥发性磷化物,在气相通过捕获燃烧产生的自由基而抑制燃烧。ADPP热稳定性良好,能满足聚酰胺的加工要求,但其使用明显降低了PA6的热稳定性。

    Abstract:

    The flame retardancy of aluminium dipropylphosphinate(ADPP) in polyamide 6(PA6) was studied by TGA and limited oxygen index and UL 94. The cone calorimeter residue were analyzed by FTIR, SEM and 31P-NMR. It is concluded that ADPP has good flame retardancy in nylon 6. The materials with 15% ADPP achieve V-0 classification in UL 94 tests and have increased LOI value of 30.7%. Compared with PA6, the heat release rate, mass loss rate of ADPP flame retarded PA6 significantly decrease, while the total heat release increases slightly. The thermogravimetric results and the analysis of the residues after the cone calorimeter test(CCT) indicate that ADPP acts either in the condensed phase by decomposing into non-volatile aluminum phosphate to promote the carbonization of PA6, and the formed intumescent layer results in flame retardancy by the barrier effect on heat, air and decomposition products; or in the gas phase by decomposing into volatile phosphorus compounds which bring about flame retardancy by flame inhibition. The thermal stability of ADPP is better. ACPP can meet the processing requirements of polyamide, but significantly reduces the thermal stability of PA6.

    参考文献
    相似文献
    引证文献
引用本文

袁志刚,苏 倩,李 雪,王 贝,唐林生.二丙基次磷酸铝对尼龙6的阻燃作用[J].高分子材料科学与工程,2014,30(5):108-112. Zhigang Yuan, Qian Su, Xue Li, Bei Wang, Linsheng Tang. Flame Retardancy of Aluminium Dipropylphosphinate in Nylon 6[J]. Polymer Materials Science & Engineering,2014,30(5):108-112.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2014-05-15
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司