L型异型材气辅共挤胀大的三维等温数值模拟
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金资助项目(51163011);江西省青年科学基金资助项目(20121521090005);赣鄱英才555工程领军人才培养计划


Three-Dimensional Isothermal Numerical Simulation of Die Swell in L-shaped Profile Gas-Assisted Coextrusion
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    应用有限元分析方法,采用Giesekus本构方程,对L型双层共挤模型进行了三维粘弹等温共挤出数值模拟,分析了2种不同进料方案下传统共挤和气辅共挤口模出口面的速度场、剪切速率场以及挤出胀大和变形情况。研究表明,异型材传统共挤的挤出胀大和变形受进料方案的影响,而气辅共挤则不受其影响。异型材传统共挤在口模出口面速度的非均匀分布是导致挤出胀大和变形的主要原因;气辅共挤口模出口面速度分布均匀,无胀大和变形,说明气辅共挤能消除异型材传统共挤中的挤出胀大和变形。

    Abstract:

    A three-dimensional isothermal viscoelastic numerical simulation was proposed for L-shaped coextrusion profile with two layers by the finite element method and the polymer melts characteristic was described by the Giesekus constitutive equation. The distribution of velocity and shear rate at die exit, die swell, and deformation were discussed between conventional coextrusion and gas-assisted coextrusion under different polymer inletting scheme. Results reveal that both die swell and deformation in conventional profile coextrusion are affected by inletting scheme, while gas-assisted coextrusion is not affected by it. The main reason for die swell and deformation in conventional coextrusion is the nonuniform velocity distribution at die exit. In gas-assisted coextrusion process, there is no die swell and deformation and the velocity distribution at die exit is uniform, these reveal that the die swell and deformation can be eliminated in gas-assisted profile coextrusion.

    参考文献
    相似文献
    引证文献
引用本文

何建涛,柳和生,黄兴元,邓小珍,黄益宾. L型异型材气辅共挤胀大的三维等温数值模拟[J].高分子材料科学与工程,2014,30(5):118-122. Jiantao He, Hesheng Liu, Xingyuan Huang, Xiaozhen Deng, Yibin Huang. Three-Dimensional Isothermal Numerical Simulation of Die Swell in L-shaped Profile Gas-Assisted Coextrusion[J]. Polymer Materials Science & Engineering,2014,30(5):118-122.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2014-05-15
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司