美式复合聚合物异型材挤出成型关键技术
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

江苏高校优势学科建设工程资助项目;连云港市科技(工业)攻关基金(CG1308);江苏省海洋资源开发研究院开发基金(JSIMR14C07)


Key Technology for the Extrusion Molding of American Composite Polymer Profile
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    美式复合聚合物异型材(以下简称美式异型材)挤出成型设计包括挤出模头成型设计、定型模冷却成型设计以及水箱冷却定型块设计。挤出模头成型设计关键是挤出流道应平滑过渡,熔体流出模头时流速应均匀一致;定型模冷却成型设计关键是美式异型材冷却均匀、真空吸附压力均衡;水箱冷却定型设计关键是美式异型材局部功能区挤出阻力减小。通过有限元数值模拟和结合并行工程的CAD/CAE/CAM 网络系统专家数据库,进一步优化设计,结果表明,熔体从模头出口处均匀挤出,经定型模、水箱冷却成型,美式异型材结构尺寸及性能完全符合要求。

    Abstract:

    The extrusion molding design of American composite polymer profile (hereinafterreferred to as American profile) includs the extrusion die molding design, cooling molding design for calibrator and cooling molding plate design for water tank. The key point of extrusion die molding design is that the extrusion runner should be smooth in transition, and the melt should be of the even flow velocity; the cooling molding design for calibrator is crucial in the even and balanced vacuum adsorbent pressure of American profile; the cooling molding plate design for water tank is crucial in the decreasing extrusion pressure in the local functional region of American profile. Through numerical simulation of finite elements and the CAD/CAE/CAM network system expert database of the concurrent engineering, the design was further optimized. The results show that the melt is evenly extruded at the exit of the extrusion die, cooled and molded by the calibrator and water tank. The structural size and performance of the American profile meet the requirements completely.

    参考文献
    相似文献
    引证文献
引用本文

王其兵.美式复合聚合物异型材挤出成型关键技术[J].高分子材料科学与工程,2014,30(5):123-126. Qibing Wang. Key Technology for the Extrusion Molding of American Composite Polymer Profile[J]. Polymer Materials Science & Engineering,2014,30(5):123-126.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2014-05-15
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司