高性能空调换热器用亲水性丙烯酸酯涂料
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

山东省威海市科学技术局科技合作特别奖资金资助


High-Performance Hydrophilic Acrylic Coating for Air-Condition Heat Exchanger
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    以过硫酸铵(APS)为引发剂,丙烯酰胺(AM)、丙烯酸(AA)及甲基丙烯酸甲酯(MMA)为主要共聚单体,通过自由基水溶液聚合,制备了具有优良亲水性能的丙烯酸酯树脂涂料。探讨了反应温度、保温时间对合成工艺的影响以及各单体含量和中和度对涂膜亲水性能的影响,并采用红外光谱和差示扫描量热分析对共聚物进行了表征。结果表明,单体转化率随温度升高呈现先增加后降低的趋势;随着保温时间的延长,单体转化率逐渐增大直至趋于平衡,最佳反应温度和保温时间为80℃和5h。随着AA含量的增加,涂膜的亲水性先增加后降低;在一定范围内,随着MMA含量的增加,涂膜的亲水性先降低后增加,当MMA含量超过一定范围后,其亲水性呈现继续增加的趋势,最佳单体质量比为m(AM)∶m(MMA)∶m(AA)=7∶2∶1。随着中和度增加,涂膜的亲水性先增加后降低,最佳的中和度为30%,其接触角约为8°。差示扫描量热分析结果表明,合成的共聚物具有良好耐热性,其玻璃化转变温度约为120℃。

    Abstract:

    A type of acrylic resin for air-condition heat exchanger with good hydrophilic performance was synthesized by the method of free-radical solution polymerization using ammonium persulfate (APS) as initiator, methyl methacrylate (MMA), acrylamide (AM) and acyclic acid (AA) as reactive monomers. The effects of reaction temperature, heat preservation time on the copolymerization and the effects of monomer content, neutralization degree on the hydrophilic property of resin film were investigated. The copolymer was characterized by IR and DSC. The results show that the monomer conversion rate firstly increases and then decreases with increasing temperature and gradually increases till to the balance with increasing holding time. The optimum reaction temperature is 80 ℃ and holding time is 5h. The hydrophilicity of coatings film firstly increases and then decreases with increasing AA content; the hydrophilicity while firstly decreases and then increases with increasing MMA content. The optimal ratio of m(AM)∶m(MMA)∶m(AA) is 7∶2∶1. The hydrophilicity of coatings film firstly increases and then decreases with increasing neutralization degree. The optimum neutralization degree is 30% and the contact angle is 8°. DSC result shows that the synthesized copolymer provides a good heat resistance and glass transition temperature is about 120 ℃.

    参考文献
    相似文献
    引证文献
引用本文

黄 丽,雷景新,周昌林.高性能空调换热器用亲水性丙烯酸酯涂料[J].高分子材料科学与工程,2014,30(5):127-131. Li Huang, Jingxin Lei, Changlin Zhou. High-Performance Hydrophilic Acrylic Coating for Air-Condition Heat Exchanger[J]. Polymer Materials Science & Engineering,2014,30(5):127-131.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2014-05-15
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司