Cu2+ 磁性壳聚糖印迹粒子的制备及对Cu2+的吸附
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

河南省高校可以创新人才支持计划资助项目(2008HASTIT019);国家自然科学基金资助项目(20976168,21271160)


Preparation of Magnetic Chitosan Cu2+ Imprinted Particles and the Adsorption of Cu2+
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    采用一步共沉淀法和离子印迹技术,制备了Fe3O4-壳聚糖(Fe3O4-CTS)印迹粒子。通过X射线衍射、傅里叶红外光谱,振动样品磁强计、热重分析、Zeta电位等手段对Fe3O4-CTS印迹粒子及对比粒子进行结构和性能表征。研究了pH、吸附剂的量、Cu2+初始浓度、吸附时间及温度等不同因素对吸附性能的影响。结果表明,对于印迹粒子,pH=6,吸附时间为4h,为较理想的吸附条件;当溶液中Cu2+ 的质量浓度为120mg/g,吸附剂的质量为50mg时,吸附基本达到了平衡,单位吸附量约为21.304mg/g。

    Abstract:

    Fe3O4-chitosan (Fe3O4-CTS) magnetic imprinted particles were synthesized by one-step coprecipitation and ion imprinting technique. The Fe3O4-CTS imprinted particles and black particles were characterized by X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), Vibrating sample magnetometer (VSM), thermogravimetric analysis (TG) and zeta potential. The influence of the factors (pH, the amount of adsorbents, initial concentration ofCu2+, contact time and temperature) on the adsorption capacity was investigated. Resulting, for the imprinted particles, the optimum condition is listed as following: pH of 6, adsorption time of 4 h. The adsorption gets the equilibrium under the condition of initialCu2+ concentration of 120 mg/g, the amount of adsorbents of 50 mg. The adsorption capacity is 21.304 mg/g.

    参考文献
    相似文献
    引证文献
引用本文

郝 营,杨清香,齐连怀,张 翔,汤 凯,朱海燕,陈志军. Cu2+ 磁性壳聚糖印迹粒子的制备及对Cu2+的吸附[J].高分子材料科学与工程,2014,30(5):154-158. Ying Hao, Qingxiang Yang, Lianhuai Qi, Xiang Zhang, Kai Tang, Haiyan Zhu, Zhijun Chen. Preparation of Magnetic Chitosan Cu2+ Imprinted Particles and the Adsorption of Cu2+[J]. Polymer Materials Science & Engineering,2014,30(5):154-158.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2014-05-15
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司