热致相分离法制备聚乳酸多孔膜
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

教育部高等学校博士点基金资助项目(20123503110003)


Porous Poly(L-Lactic Acid) Films Prepared by Thermally Induced Phase Separation
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    以N,N-二甲基甲酰胺(DMF)为溶剂,采用热致相分离方法制备出不同形貌聚乳酸(PLLA)多孔膜。通过差示扫描量热实验测定了PLLA/DMF溶液的结晶温度及制备的多孔膜的热力学性能;采用扫描电镜和X射线衍射仪表征了PLLA多孔膜的形貌及晶型。结果表明,随着溶液浓度的增大,PLLA结晶温度逐渐升高。低浓度溶液中得到纳米纤维网状PLLA多孔膜,高浓度溶液中制备出微球状PLLA多孔膜;纤维网状和微球状PLLA分别为α’和α晶型,形成机理分别是液-液相分离和成核结晶生长。同时,随着浓度的增大,PLLA熔点(Tm)略有升高。

    Abstract:

    A series of porous poly(L-lactic acid) (PLLA) films were fabricated from PLLA/DMF solutions by thermally induced phase separation. The crystallization temperatures of PLLA/DMF solutions and thermal properties of porous PLLA films were examined by DSC. The morphology and crystal form of PLLA films were measured by SEM and XRD, respectively. The results show that the crystallization temperature gradually increases with PLLA concentration increasing. The film with nanofibrous network structure is obtained from low concentration solution, while film with porous microspheres is obtained from high concentration solution; the crystal form is α’ and α-form, respectively; the formation mechanism for the PLLA nanofibrous network and microspheres is liquid-liquid phase separation, nucleation and crystal growth, respectively. In addition, Tm of PLLA films increases slightly with increase of PLLA concentration.

    参考文献
    相似文献
    引证文献
引用本文

刘 敏,覃 王,刘瑞来,刘颖颖,刘海清.热致相分离法制备聚乳酸多孔膜[J].高分子材料科学与工程,2014,30(5):159-162. Min Liu, Wang Qin, Ruilai Liu, Yingying Liu, Haiqing Liu. Porous Poly(L-Lactic Acid) Films Prepared by Thermally Induced Phase Separation[J]. Polymer Materials Science & Engineering,2014,30(5):159-162.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2014-05-15
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司