嵌段型聚倍半硅氧烷-硅橡胶的制备及性能
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金资助项目(51073097)


Preparation and Property of Polyhedral Oligomeric Silsesquioxane-b-Silicone Rubber
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    通过缩合聚合反应使含有2个乙氧基的八苯基聚倍半硅氧烷(DOPO)与羟基封端的聚硅氧烷预聚物通过化学键合,得到POSS位于聚硅氧烷主链的POSS-聚硅氧烷嵌段共聚物,然后硫化得到POSS位于聚硅氧烷分子链的嵌段型POSS-硅橡胶。研究表明,通过化学共聚,POSS以纳米尺寸均匀分散于硅橡胶中并显著影响聚硅氧烷的分子运动,从而显著影响其粘弹性和力学性能。POSS的引入不仅提高了聚硅氧烷的零切黏度和模量,并使剪切变稀提前,而且使硅橡胶的玻璃化转变温度和储能模量均得到提高。值得注意的是,刚性POSS的引入可显著提高硅橡胶的热稳定性,POSS质量分数为5%时,硅橡胶的初始分解温度提高了73℃,最大分解温度提高了127℃,残余率从0.18%提高到18.26%。

    Abstract:

    A novel POSS-silicone rubber with blocked structure was prepared via copolymerization of polyhedral oligomeric silsesquioxane containing two ethoxy group and hydroxyl-capped polydimethylsiloxane(PDMS), followed by vulcanization. The study on the POSS-silicone rubber demonstrates that POSS is uniformly distributed in silicone rubber and the incorporation of POSS cages into PDMS chains can dramatically affect molecular motion of silicone rubber, thus leads to distinction in viscoelastic and mechanical property. Not only the zero-shear viscosity and modulus of polydimethylsiloxane are increased, but also the glass transition temperature and storage modulus of silicone rubber are raised, owing to the chemical bonding of POSS to PDMS. It is also noticeable that thermal stability improvement of silicone rubber is enormous. When 5% rigid POSS particles was added, the initial degradation temperature of silicone rubber is increased by 60 ℃ and the temperature of maximum degradation is increased by 127 ℃. Besides, the residue ratio at 800 ℃ is raised from 0.18% to 18.26%.

    参考文献
    相似文献
    引证文献
引用本文

刘玉峰,石芸慧,张 典,党 煜,邓淋丹,黄光速.嵌段型聚倍半硅氧烷-硅橡胶的制备及性能[J].高分子材料科学与工程,2014,30(6):5-9. Yufeng Liu, Yunhui Shi, Dian Zhang, Yu Dang, Lindan Deng, Guangsu Huang. Preparation and Property of Polyhedral Oligomeric Silsesquioxane-b-Silicone Rubber[J]. Polymer Materials Science & Engineering,2014,30(6):5-9.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2014-06-16
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司