钴锌双金属氰化物/戊二酸锌复合催化剂催化CO2 与环氧丙烷的共聚反应
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

广西科技攻关项目(11107021-5-2);广西科学院基本科研业务费项目(10YJ25SW01);广西重点实验室基金(07-109-001-3)


Copolymerization of Carbon Dioxide and Propylene Oxide with Co-Zn Double Metal Cyanide Complex / Zinc Glutarate Composite Catalysts
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    制备了钴锌双金属氰化物/戊二酸锌(DMC-P123/ZnGA)复合催化剂并用于催化CO2与环氧丙烷(PO)共聚反应。采用热重分析、X射线衍射和扫描电镜对催化剂进行了表征。结果表明,DMC-P123以更小粒径均匀分散到ZnGA 中;该催化剂对于CO2与PO 共聚反应有较高的催化效率,并得到高相对分子质量的聚碳酸亚丙酯(PPC);当反应温度为60℃,反应时间为12h时,催化效率大于550g聚合物/g催化剂,PO 的转化率达到94%;所得共聚产物的数均相对分子质量达到6万,碳酸酯链节含量大于68%,CO2固定率达到30%。

    Abstract:

    The Co-Zn bimetal cyanide/zinc glutarate (DMC-P123/ZnGA) catalyst was prepared and used for copolymerization of CO2 and propylene oxide (PO). DMC-P123/ZnGA was characterized by TGA, XRD and SEM. The results indicate that DMC-P123 is highly dispersed on ZnGA with small size. The study displays that high catalytic efficiency of copolymerization CO2 and PO and high molecular weight poly propylene carbonate (PPC) were obtained by using this kind of catalyst. When reaction temperature is 60 ℃ and time is 12 h, the catalytic efficiency is greater than 550 g polymer/g catalyst and the percent conversion of propylene oxide reaches 94%. Number-average molar mass of the copolymerization products achieves 60 000; the chain-link content of carbonic ester is more than 68%; the carbon dioxide fixation ratio comes up to 30%.

    参考文献
    相似文献
    引证文献
引用本文

杨 辉,黎演明,黄 慨,龙思宇,黄日波.钴锌双金属氰化物/戊二酸锌复合催化剂催化CO2 与环氧丙烷的共聚反应[J].高分子材料科学与工程,2014,30(6):24-28. Hui Yang, Yanming Li, Kai Huang, Siyu Long, Ribo Huang. Copolymerization of Carbon Dioxide and Propylene Oxide with Co-Zn Double Metal Cyanide Complex / Zinc Glutarate Composite Catalysts[J]. Polymer Materials Science & Engineering,2014,30(6):24-28.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2014-06-16
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司