引发剂用量对SBA-15孔道内甲基丙烯酸甲酯溶液聚合的影响
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金资助项目(21064002);教育部留学回国人员启动基金(20113942)


Effect of Initiator Content on Methyl Methacrylate Solution Polymerization in the Channels of Mesoporous SBA-15
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    利用介孔分子筛SBA-15的介孔孔道结构,通过调节引发剂过氧化苯甲酰的用量,在其内部进行了甲基丙烯酸甲酯(MMA)的原位溶液聚合反应,利用X射线衍射、N2 吸附-脱附、傅里叶变换红外光谱、凝胶渗透色谱、热重、差示扫描量热等测试手段对所得复合材料及孔道内的聚合物进行研究。结果表明,聚合后,复合材料的比表面积、孔径、孔容降低,但仍保持介孔结构;孔道内聚合物相对分子质量是常规溶液聚合的几十倍,随着引发剂用量的增加,孔道内部聚合的PMMA含量增加,相对分子质量下降,相对分子质量分布变宽,热稳定性提高,玻璃化转变温度降低。

    Abstract:

    In-situ solution radical polymerization of methyl methacrylate (MMA) was carried out in the channels of mesoporous SBA-15. PMMA/SBA-15 composite and polymers in the channels were characterized by XRD, N2 adsorption-desorption, FT-IR, GPC, TGA and DSC. The results show that, compared with SBA-15, the surface areas, pore size and pore volume of the composites decrease, the composites retain mesoporous structures. The molecular weight of PMMA in pores is over 10 times than of one prepared without SBA-15. As increase of the initiator content, it produces higher content of PMMA in the channels, lower molecular weight, broader molecular weight distribution, higher thermal stability, and lower glass transition temperature of the polymer.

    参考文献
    相似文献
    引证文献
引用本文

魏志波,孙发孟,张发爱.引发剂用量对SBA-15孔道内甲基丙烯酸甲酯溶液聚合的影响[J].高分子材料科学与工程,2014,30(6):29-32. Zhibo Wei, Fameng Sun, Fa’ai Zhang. Effect of Initiator Content on Methyl Methacrylate Solution Polymerization in the Channels of Mesoporous SBA-15[J]. Polymer Materials Science & Engineering,2014,30(6):29-32.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2014-06-16
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司