剪切诱导聚己二酸丁二醇酯的结晶行为
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金资助项目(21204045、21276151);陕西省重点科技创新团队(2013KCT-08);陕西科技大学科研创新团队(TD12-04)


Shear-Induced Crystallization of Poly(Butylene Adipate)
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    使用偏光显微镜、广角X射线衍射仪和扫描电子显微镜等测试手段,分别研究了纤维诱导和剪切作用下聚己二酸丁二醇酯(PBA)结晶的晶型结构和结晶形貌。结果表明,不同纤维置入过冷态PBA 熔体时产生的剪切作用诱导PBA在纤维表面形成横晶结构。在剪切应力的作用下,PBA 形成不同于球晶的高成核密度、高取向度的横晶。过冷度决定横晶的晶型结构,高温时形成热力学性能更为优异的α型横晶,而较低的结晶温度则有利于生成β型横晶。

    Abstract:

    Shear induced crystallization of poly(butylene adipate) (PBA) was studied by polarizing microscope (POM), wide-angle X-ray diffraction (XRD) and scanning electron microscopy (SEM). It is revealed that the shear, caused by fiber locating in supercooled PBA melt, induces the transcrystalline-like supermolecular structure with high-density nucleation and high orientation, which are different from the spherulites. The shear-induced supermolecular structures are determined by the crystallization temperature. High temperature favors thermodynamically stable α-type crystals, while low temperature contributes to β-type crystals.

    参考文献
    相似文献
    引证文献
引用本文

王海军,李金祥,王学川.剪切诱导聚己二酸丁二醇酯的结晶行为[J].高分子材料科学与工程,2014,30(6):73-76. Haijun Wang, Jinxiang Li, Xuechuan Wang. Shear-Induced Crystallization of Poly(Butylene Adipate)[J]. Polymer Materials Science & Engineering,2014,30(6):73-76.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2014-06-16
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司