微塑件超声模压成型对等规聚丙烯结晶行为的影响
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金资助项目(51175348)


Effect of Micro Ultrasonic Powder Molding on Crystallization of Isotactic Polypropylene
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    针对微塑件成型,文中运用了微塑件超声粉末模压成型的新方法对聚丙烯微塑件进行成型,并利用差示扫描热量法、广角X射线衍射、偏光显微镜研究了超声时间对聚丙烯结晶行为的影响。结果表明,在一定时间内,随着超声时间的延长,微塑件的结晶度逐渐减小,同时其熔点、起始结晶温度逐渐向低温偏移,结晶完善性逐渐增加,晶粒细化;微塑件的晶型主要表现为等规聚丙烯最为常见的α晶型,超声时间的变化并未使其晶型发生转变;微塑件内部组织主要以球晶的形式生长。

    Abstract:

    Aimed at micro plastic parts molding, a novel method of micro ultrasonic powder molding (micro-UPM) on polypropylene micro plastic parts was applied, and the crystallization behavior was studied by differential scanning calorimeter (DSC), wide-angle X-ray diffraction (WXRD), polarized light microscope at different ultrasonic time. The results indicate that, with the ultrasonic time increasing, the crystallinity decreases, the melting temperature and onset crystallization temperature shift to lower temperature, more perfect crystallization is formed and the crystallite dimension decreases. The crystal type of samples mainly presents α crystal type, which is the most common crystal type of isotactic polypropylene. The ultrasonic time does not change crystal type of samples. The internal organization of micro plastic parts mainly grows in the form of spherulite.

    参考文献
    相似文献
    引证文献
引用本文

曾 昆,伍晓宇,梁 雄,徐 斌,程 蓉,罗 烽.微塑件超声模压成型对等规聚丙烯结晶行为的影响[J].高分子材料科学与工程,2014,30(6):82-86. Kun Zeng, Xiaoyu Wu, Xiong Liang, Bin Xu, Rong Cheng, Feng Luo. Effect of Micro Ultrasonic Powder Molding on Crystallization of Isotactic Polypropylene[J]. Polymer Materials Science & Engineering,2014,30(6):82-86.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2014-06-16
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司