反应挤出制备苯乙烯-二乙烯基苯交联接枝聚丙烯的熔体强度
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金资助项目(51073109)


Melt Strength of Styrene-Divinylbenzene Cross-Linking and Grafting Polypropylene Prepared by Reactive Extrusion
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    采用反应挤出技术制备了以过氧化二异丙苯为引发剂、二乙烯基苯和苯乙烯的混合物为交联剂的交联接枝聚丙烯(PP)改性材料。通过熔体流动速率、动态流变性和差示扫描量热法等测试计算了改性材料的熔体强度、加工流动性和结晶行为,并分析了反应物组分变化对材料结构和行为的影响。研究结果表明,添加适量的过氧化二异丙苯、苯乙烯和二乙烯基苯既不会对材料的凝聚结构及结晶行为造成很大的影响,又都能一定程度提高材料的熔体强度。苯乙烯的加入可以增大交联点之间线型链段的长度,增加PP分子链间交联点分布的均匀性,起到部分替代或充分发挥二乙烯基苯交联剂的效果。

    Abstract:

    Using dicumyl peroxide as initiator and styrene-divinylbenzene blend as cross-linking agent, the cross-linking and grafting polypropylenes (PPs) were prepared by reactive extrusion. The melt strength, processability and crystallization behaviors of PPs were investigated by the melt flow rate, dynamic rheology and differential scanning calorimetry measurements. The effect of the components on the structures and properties was also studied. The results indicate that the additions of the moderate dicumyl peroxide, styrene and divinylbenzene not only show a small effect on the condensed structure and crystallization behaviors of PPs, but also make the melt strength of PPs increase. The styrene plays a good role to partly replace or sufficiently express divinylbenzene by making the linear segment length increase between the cross-linking points and the distribution of the cross-linking points more uniform between PP chains.

    参考文献
    相似文献
    引证文献
引用本文

何 磊,侯羽佳,谢邦互,杨 伟,杨鸣波.反应挤出制备苯乙烯-二乙烯基苯交联接枝聚丙烯的熔体强度[J].高分子材料科学与工程,2014,30(6):125-129. Lei He, Yujia Hou, Banghu Xie, Wei Yang, Mingbo Yang. Melt Strength of Styrene-Divinylbenzene Cross-Linking and Grafting Polypropylene Prepared by Reactive Extrusion[J]. Polymer Materials Science & Engineering,2014,30(6):125-129.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2014-06-16
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司