聚甲基丙烯酸甲酯/凹凸棒土杂化材料的制备及流变行为
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

江苏高校优势学科建设工程资助项目


Preparation and Rheological Behavior of Polymethylmethacrylate/Attapulgite Hybrid Materials
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    采用γ-氨丙基三乙氧基硅烷(APTES)对凹凸棒土(AT)进行接枝改性制得表面带有伯胺基的改性粒子ATAPTES,然后通过表面引发氧化还原聚合法制备凹凸棒土/聚甲基丙烯酸甲酯(PMMA)杂化粒子AT-g-PMMA。采用红外光谱和热失重分析法对改性粒子和杂化粒子进行表征。结果表明,PMMA 成功接枝在凹凸棒土表面,接枝率高达27.1%。通过熔融共混法将杂化粒子与PMMA进行复合,利用旋转流变仪对材料的动态流变行为进行了研究。结果表明,杂化粒子使体系的线性粘弹区和粘流活化能增大,且在低剪切频率下,体系的黏度和模量明显增大,体系黏度对频率的依赖性减小。

    Abstract:

    Attapulgite (AT) was modified with γ-aminopropyltriethoxysilane (APTES) to get modified particles AT-APTES, and then AT-g-PMMA hybrid particles were prepared by surface-initiated redox polymerization. FT-IR and TGA results confirm that hybrid particles were prepared successfully and the grafting degree of PMMA is attained to 27.1%. The composites of PMMA and AT-g-PMMA, AT, AT-APTES were processed though melt blending and the influence of hybrid particles on dynamic rheological behaviors was researched by rotational rheometer. Experimental results show that the apparent viscosity, flow activation energy and dynamic modulus of PMMA/AT-g-PMMA increase, and the flow activation energy increases to 108.83 kJ/mol under the condition of shear frequency 10 rad/s. A lower viscoelastic transformation frequency and a longer relaxation time of PMMA/AT-g-PMMA were obtained.

    参考文献
    相似文献
    引证文献
引用本文

倪庆婷,杨海存,刘 惠,叶 青,龚方红.聚甲基丙烯酸甲酯/凹凸棒土杂化材料的制备及流变行为[J].高分子材料科学与工程,2014,30(6):156-160. Qingting Ni, Haicun Yang, Hui Liu, Qing Ye, Fanghong Gong. Preparation and Rheological Behavior of Polymethylmethacrylate/Attapulgite Hybrid Materials[J]. Polymer Materials Science & Engineering,2014,30(6):156-160.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2014-06-16
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司