Abstract:Carbon fiber reinforced polyether ether ketone (PEEK) composites were prepared by compression molding. The thermal and mechanical properties were characterized by differential scanning (DSC), thermogravimetry (TG), mechanical tests, and scanning electron microscope (SEM) was used to observe the surface topography of composites. The results show that the preferred molded preparation process parameters are as follows: processing temperature 380 ℃~390 ℃, retention time 30 min, pressure 2 MPa~3 MPa; dwell time of 3 h and the pressure of 4 MPa~5 MPa. The flexural strength of products can come up to 1783 MPa, tensile strength approaches 327 MPa, decomposition temperature is 578 ℃, further proof of excellent thermal stability and mechanical performance of composite materials.