可发性钡酚醛泡沫树脂的合成与表征
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

横向攻关课题


Synthesis and Characterization of Foaming Barium Phenolic Foam Resin
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    以Ba(OH)2 ·8H2O 为催化剂,通过逐步升温滴加甲醛的方法合成了低游离酚可发性钡酚醛泡沫树脂。探索了反应原料摩尔比、催化剂用量、反应时间、反应温度对可发性甲阶酚醛树脂游离酚和羟甲基含量的影响。确定合适的合成工艺为F/P为1∶1.3~1.6、反应温度80℃~85℃、反应时间2h、催化剂用量5%,最终钡酚醛泡沫树脂游离酚含量为3%,残炭达44.3%,固含量为78%~85%,氧指数(LOI)为54.9,并通过红外光谱分析和热失重分析测试表征。

    Abstract:

    Using Ba(OH)2·8H2O as catalyst, low free formaldehyde barium phenolic foam resin was synthesized by gradually warming dropping. The effect of different mole ratio of F/P, catalyst amount, reaction time, reaction temperature on the free phenol and methylol content of foaming barium phenolic foam resin was explored. The appropriate synthetic processes was determined, such as the mole ratio of F/P 1∶1.3 to 1.6, the reaction temperature 80 ℃ to 85 ℃, reaction time 2h, the catalyst amount of 5%. The free phenol content of final barium phenolic foam resin is 3%, carbon residue is 44.3%, solid content is from 78% to 85%, the oxygen index (LOI) is 54.9, analyzed by FT-IR and TG characterization.

    参考文献
    相似文献
    引证文献
引用本文

耿刚强,苗 鹏,王宏震,赵诚斌,张 超,赵永芳,许 洋.可发性钡酚醛泡沫树脂的合成与表征[J].高分子材料科学与工程,2014,30(7):20-23. Gangqiang Geng, Peng Miao, Hongzhen Wang, Chengbin Zhao, Chao Zhang, Yongfang Zhao, Yang Xu. Synthesis and Characterization of Foaming Barium Phenolic Foam Resin[J]. Polymer Materials Science & Engineering,2014,30(7):20-23.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2014-07-14
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司