经二氧化碳激光加热拉伸后聚酯长丝的力学性能和微观结构
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

江苏省自然科学基金资助项目(BK2009149);现代丝绸国家工程实验室资助项目(20102903)


Mechanical Properties and Microstructure of Poly(Ethylene Terephthalate) Filament Drawn with Carbon Dioxide Laser Heating
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    用CO2 激光对聚酯预取向丝(POY)进行加热拉伸,研究了拉伸倍数和激光器电流对聚对苯二甲酸乙二醇酯(PET)长丝的力学性能、分子构成和结晶度的影响。研究发现,PET长丝的断裂强度和结晶度随拉伸倍数和激光器电流的增大而增大,而断裂伸长率随之明显下降。当拉伸倍数为2.4,激光器电流为5mA 时,断裂强度由原来的2.445cN/dtex增大到4.319cN/dtex,结晶度由原来的26.45%增加到40.00%,断裂伸长率由原来的121.9%降至9.0%。傅里叶红外光谱分析结果表明,PET长丝的分子构成在激光加热拉伸前后没有明显变化。

    Abstract:

    Poly(ethylene terephthalate) (PET) pre-oriented yarn (POY) was heated by carbon dioxide (CO2) laser while drawing it. The effects of draw ratio and laser current on the mechanical property, molecular composition and crystallinity of PET filament were studied. The results reveal that the breaking strength and crystallinity of PET filament increase and the breaking elongation decreases obviously as the draw ratio and laser current increasing. Compared to original PET filament, the breaking strength increases from 2.445 cN/dtex to 4.319 cN/dtex, crystallinity increases from 26.45% to 40.00% and breaking elongation decreases from 121.9% to 9.0% when the draw ratio is 2.4 and laser current is 5 mA. The Fourier transform infrared (FT-IR) analysis shows that the molecular composition of PET filament remains unchanged after drawn with CO2 laser heating.

    参考文献
    相似文献
    引证文献
引用本文

庄高磊,张伟国,田保中.经二氧化碳激光加热拉伸后聚酯长丝的力学性能和微观结构[J].高分子材料科学与工程,2014,30(7):67-70. Gaolei Zhuang, Weiguo Zhang, Baozhong Tian. Mechanical Properties and Microstructure of Poly(Ethylene Terephthalate) Filament Drawn with Carbon Dioxide Laser Heating[J]. Polymer Materials Science & Engineering,2014,30(7):67-70.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2014-07-14
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司