高性能减缩材料的开发与性能
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金资助项目(51278232)


Development and Performance of Shrinkage-Reducing Materials
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    以不饱和聚醚大单体PMT与丙烯酸(AA)进行水溶液自由基共聚,合成了高性能减缩材料(CSRA)。考察了聚合单体分子结构、反应配比、吸附行为及相对分子质量大小等条件对高性能减缩材料减缩性能的影响。当采用相对分子质量为1000的PMT与AA以摩尔比1∶1反应,聚合浓度为35%,重均相对分子质量为25000左右时,所制备的高性能减缩材料不但具有优异的减缩性能,且具有较好的分散能力,掺量为1.5%时,混凝土28d减缩率为40%,减水率为29%,实现了减缩与减水性能的统一。

    Abstract:

    The high performance shrinkage-reducing material (CSRA) was synthesized with unsaturated polyether monomer and acrylic acid through free radical copolymerization. The effects of monomers, reaction ratio, adsorption capacity and molecular weight on the synthesis and performance of CSRA were discussed. The prepared material has excellent shrinkage-reducing performance and good dispersion ability while the reaction was performed at polymerization mass fraction of 35% and mole ratio of PMT∶AA 1/1, and Mw of the yielded material is around 25000. The concrete drying shrinkage reduction of CSRA with the addition of 1.5% is about 40% at 28 d and the water-reducing rate is about 29%. The unity of shrinkage-reducing and dispersing performance is achieved.

    参考文献
    相似文献
    引证文献
引用本文

高南箫,冉千平,乔 敏,俞寅辉,刘加平.高性能减缩材料的开发与性能[J].高分子材料科学与工程,2014,30(7):115-119. Nanxiao Gao, Qianping Ran, Min Qiao, Yinhui Yu, Jiaping Liu. Development and Performance of Shrinkage-Reducing Materials[J]. Polymer Materials Science & Engineering,2014,30(7):115-119.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2014-07-14
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司